2019 Ram 2500 Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2019 Ram 2500? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick Reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 130-150 ft-lb / 176-203 Nm | 8-lug wheels |
| Oil Drain Plug | 37 ft-lb / 50 Nm | 6.4L HEMI V8 & 6.7L Cummins |
| Transmission Drain Plug | 30-40 ft-lb / 41-54 Nm | 8-speed automatic |
| Brake Caliper Bracket Bolts | 130-145 ft-lb / 176-197 Nm | Front and rear |
| Brake Caliper Slide Pins | 25-30 ft-lb / 34-41 Nm | Front and rear |
| Axle Nut | 185-250 ft-lb / 251-339 Nm | Dependent on axle type |
| Spark Plugs | 13 ft-lb / 18 Nm | 6.4L HEMI V8 |
| Valve Cover Bolts | 8 ft-lb / 11 Nm | 6.4L HEMI V8 & 6.7L Cummins |
| Intake Manifold Bolts | 9-11 ft-lb / 12-15 Nm | 6.4L HEMI V8 |
Wheel Lug Torque Pattern
For the 2019 Ram 2500's 8-lug wheels, use a star or cross pattern to ensure even seating and prevent wheel distortion. Start with one lug nut, tighten it to about half the recommended torque, then move to the opposite lug nut and do the same. Continue this pattern for all eight lug nuts before repeating the process to bring them to their final torque specification. This two-stage tightening process is critical for safety and proper wheel alignment.
Brake Torque Notes
Brake system fasteners are critical to your safety. The torque values for brake caliper bracket bolts are significantly higher than for the slide pins. The bracket bolts secure the stationary part of the caliper to the knuckle, while the slide pins allow the caliper to move and adjust for pad wear. Always use a calibrated torque wrench and ensure the threads are clean and free of debris or corrosion before assembly. It's also wise to use a thread-locking compound on the caliper bracket bolts as an added safety measure.
Why Torque Matters
Torque is the rotational equivalent of force, and applying the correct amount is crucial for any vehicle repair, especially on a heavy-duty truck like the 2019 Ram 2500. Over-tightening fasteners can stretch the threads, leading to bolt failure, while under-tightening can allow components to loosen over time, which can have catastrophic consequences. Using a calibrated torque wrench ensures that each fastener is applying the correct clamping force, keeping components secure and functioning as designed. From wheel nuts to engine components, correct torque is a fundamental aspect of a safe and reliable repair.
Disclaimer: The torque specifications provided in this article are for reference only. Critical fasteners should always be verified in the OEM service manual for your specific vehicle configuration before beginning any work. Variations in submodels, engine types, and other factors can result in different torque requirements.
Find a trusted shop on Repairius.
More specs for the 2019 Ram 2500
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2019 Ram 2500 Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.