Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Fluid Type Specs

    2018 Ram ProMaster — Fluid Type Specs

    A complete guide to the 2018 Ram ProMaster's fluid specifications

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2018 Ram ProMaster? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Reference

    FluidType/SpecCapacity
    Engine OilSAE 5W-30 full synthetic meeting FCA MS-13340 or API SP6.0 quarts (3.6L V6)
    Engine CoolantMopar OAT (purple) meeting FCA MS-1210610.5 quarts (3.6L V6)
    Transmission FluidMopar ZF 8&9 Speed ATF (8HP/9HP) or equivalentVerify in owner's manual
    Brake FluidDOT 3As needed
    Power Steering FluidElectric Power Steering (EPS) - no fluid requiredN/A
    Washer Fluid-30°F / -34°C Bug & Tar Remover with De-icer7.0 quarts

    Engine Oil

    The 2018 Ram ProMaster with the 3.6L Pentastar V6 engine requires SAE 5W-30 full synthetic engine oil that meets the FCA MS-13340 specification. If an oil meeting this spec is not available, you can use a full synthetic SAE 5W-30 oil that meets the API SP (or a later) standard.

    Capacity: 6.0 quarts with filter.

    Interval: The oil change interval on the ProMaster is determined by the oil life monitoring system, which will alert you when it's time for a change. However, a good rule of thumb is to not exceed 8,000-10,000 miles or one year, whichever comes first.

    Notes: Using the correct oil is critical for the longevity of the Pentastar engine. The MS-13340 spec ensures the oil has the correct viscosity, detergency, and other additives to protect the engine's variable valve timing (VVT) system and other sensitive components. Never use a conventional or synthetic blend oil, as this can lead to sludge formation and premature engine wear.


    Engine Coolant

    The ProMaster uses a specific Mopar OAT (Organic Acid Technology) coolant that meets the FCA MS-12106 specification. This coolant is typically purple in color.

    Capacity: 10.5 quarts (3.6L V6).

    Interval: The factory-fill coolant has a service life of 10 years or 150,000 miles, whichever comes first.

    Notes: It is extremely important to only use the specified OAT coolant. Mixing different coolant types (e.g., OAT with HOAT or IAT) can cause the coolant to gel, leading to blockages in the cooling system, overheating, and expensive damage to the engine and radiator. Never use "universal" or "all makes, all models" coolants, as these may not be compatible with the ProMaster's cooling system materials.


    Transmission Fluid

    The 2018 ProMaster is equipped with a 6-speed automatic transmission that requires Mopar ZF 8&9 Speed ATF (Automatic Transmission Fluid) or an equivalent fluid that meets the FCA specification. The transmission used in the ProMaster is a variant of the ZF 8HP and 9HP family, although it is a 6-speed in this application.

    Capacity: Varies depending on whether you are doing a drain and fill or a complete overhaul. Always verify the correct fluid level using the dipstick or by following the manufacturer's recommended procedure.

    Interval: The transmission fluid is considered "fill for life," but it is a good practice to have it inspected and potentially changed every 60,000-100,000 miles, especially if the vehicle is used for heavy hauling or in severe service conditions.

    Notes: Using the correct transmission fluid is non-negotiable. The wrong fluid can cause shifting problems, transmission shudder, and ultimately, catastrophic failure. Do not use any other type of ATF, such as ATF+4 or a generic "multi-vehicle" fluid. Always use the genuine Mopar fluid or a high-quality aftermarket equivalent that is specifically formulated for this transmission.


    Brake Fluid

    The 2018 Ram ProMaster requires DOT 3 brake fluid. You can also use DOT 4 or DOT 5.1 fluid, as they are compatible with DOT 3 systems. However, never use DOT 5 silicone-based fluid, as it is not compatible and will damage the brake system.

    Capacity: The brake system should be filled to the "MAX" line on the reservoir. A complete flush will typically require 1-2 quarts of fluid.

    Interval: Brake fluid should be flushed and replaced every 2-3 years, regardless of mileage. Brake fluid is hygroscopic, meaning it absorbs moisture from the air. This moisture can lower the boiling point of the fluid, leading to a spongy brake pedal and reduced braking performance.

    Notes: Always use a fresh, unopened bottle of brake fluid. Once a bottle is opened, it will begin to absorb moisture. When bleeding or flushing the brake system, be careful not to get any fluid on the vehicle's paint, as it can cause damage.


    Power Steering Fluid

    The 2018 Ram ProMaster is equipped with an Electric Power Steering (EPS) system. This system uses an electric motor to assist the driver with steering, so there is no hydraulic power steering fluid to check or change.


    Washer Fluid

    For best results, use a high-quality -30°F / -34°C bug and tar remover with de-icer washer fluid. This will help to keep your windshield clean in all weather conditions and prevent the system from freezing in the winter.

    Capacity: 7.0 quarts.


    Find a trusted shop on Repairius.

    Need service on your Ram ProMaster?

    Request service from shops in your area.

    More specs for the 2018 Ram ProMaster

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Driving or Managing a Fleet?

    Use Dispatchtool for truck navigation, driver communication, dispatching, and fleet management.

    Visit Dispatchtool
    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email