2018 Ram ProMaster Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2018 Ram ProMaster? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick Reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 130 ft-lb (176 Nm) | Refer to wheel lug torque pattern |
| Oil Drain Plug | 22-26 ft-lb (30-35 Nm) | |
| Transmission Drain Plug | 30-37 ft-lb (41-50 Nm) | |
| Front Brake Caliper Bracket Bolts | 118-129 ft-lb (160-175 Nm) | |
| Rear Brake Caliper Bracket Bolts | 118-129 ft-lb (160-175 Nm) | |
| Front Brake Caliper Slide Pins | 20-22 ft-lb (27-30 Nm) | |
| Rear Brake Caliper Slide Pins | 20-22 ft-lb (27-30 Nm) | |
| Axle Nut (Front) | 214 ft-lb (290 Nm) | One-time use nut, replace after removal |
| Axle Nut (Rear) | 162 ft-lb (220 Nm) | One-time use nut, replace after removal |
| Spark Plugs (3.6L V6) | 13-16 ft-lb (18-22 Nm) | Apply anti-seize to threads, do not over-tighten |
| Valve Cover Bolts (3.6L V6) | 8-9 ft-lb (11-12 Nm) | Snug, do not over-tighten to prevent gasket damage |
Wheel Lug Torque Pattern
For the 2018 Ram ProMaster, a star or cross-pattern should be used when tightening the wheel lug nuts. This ensures even clamping force across the wheel hub, preventing warping of the brake rotors and ensuring the wheel is securely seated. Start with one lug nut, then move to the lug nut directly opposite it. Continue this pattern until all lug nuts are hand-tight, then repeat the pattern using a torque wrench to the specified torque value.
Brake Torque Notes
When working on the braking system of your 2018 Ram ProMaster, precise torque application is crucial for safety and performance. Brake caliper bracket bolts and slide pins are critical fasteners. Incorrect torque on caliper bracket bolts can lead to loose calipers, affecting braking efficiency and potentially causing dangerous situations. Overtightening can strip threads or damage the bolts, compromising the integrity of the assembly. Caliper slide pins require precise torque to allow the caliper to float freely and ensure even pad wear and optimal braking performance. Always clean the threads of these fasteners and use new hardware where specified, especially for components subjected to high stress.
Why Torque Matters
Proper fastener torque is not just a suggestion; it's a fundamental aspect of vehicle safety and longevity. Every bolt and nut on your 2018 Ram ProMaster is designed to be tightened to a specific tension. This tension creates the clamping force necessary to hold components together securely.
Consequences of Incorrect Torque:
- Under-tightening: Leads to loose components, vibrations, premature wear, leaks, and potential catastrophic failure. For example, an under-torqued wheel lug nut could lead to a wheel detaching from the vehicle.
- Over-tightening: Can stretch and weaken bolts, strip threads, crack components, or deform gaskets, leading to leaks and failures. Over-tightening spark plugs, for instance, can damage the cylinder head threads or crack the spark plug itself.
Using a calibrated torque wrench is essential for applying the correct torque. Avoid using impact wrenches for final tightening, as they can easily over-tighten fasteners. Always consult your OEM service manual for the most accurate and up-to-date torque specifications, as variations can occur based on specific vehicle configurations or revisions.
Disclaimer: The information provided here is for general reference only. Always consult your official OEM service manual for the most accurate and up-to-date torque specifications for your specific 2018 Ram ProMaster model and engine. Critical fasteners must be verified in the OEM service manual.
Find a trusted shop on Repairius.
More specs for the 2018 Ram ProMaster
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2018 Ram ProMaster Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.