Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Coolant Capacity & Type

    2023 Ram ProMaster Coolant Capacity & Type

    Working on this 2023 Ram ProMaster? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    2023 Ram ProMaster factory oil capacity

    EngineCapacityOilFilter
    3.6L6 qt (5.6 L)SAE 0W-20 (first grade listed; see chart)—

    Source: Mopar StarParts vehicle fluid specifications (FCA US LLC / Stellantis). Values as printed. Oil capacity finder →

    The 2023 Ram ProMaster holds approximately 12.0 quarts (11.4 liters) of coolant in its cooling system.

    Quick Answer

    • Total Cooling System Capacity: 12.0 quarts (11.4 liters)
    • OEM Coolant Spec: Mopar Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) in a magenta/purple color. Meets FCA Material Standard MS-90032.
    • Mix Ratio: 50/50 prediluted or 50% concentrate with 50% demineralized water.

    Capacity by Engine Option

    All 2023 Ram ProMaster models come equipped with the 3.6L Pentastar V6 engine, so the coolant capacity is consistent across the lineup.

    EngineCapacity (Quarts)Capacity (Liters)
    3.6L Pentastar V612.011.4

    Flush Interval

    Maintaining your ProMaster's cooling system is crucial for its longevity and performance. The recommended coolant flush intervals are:

    • Normal Duty: Replace initially at 10 years or 150,000 miles, whichever comes first. After the initial replacement, follow the manufacturer's recommendation based on coolant condition.
    • Severe Duty: While Ram doesn't typically define "severe duty" for coolant replacement intervals as explicitly as for engine oil, general practice for vehicles subjected to heavy loads, frequent towing, or extreme temperatures (common for a work van) might warrant more frequent checks and potentially earlier replacement if the coolant condition dictates.

    How to Refill & Bleed

    Refilling and bleeding the cooling system correctly is vital to prevent air pockets, which can lead to overheating. For the 2023 Ram ProMaster (3.6L Pentastar V6):

    1. Safety First: Ensure the engine is cool before starting. Wear appropriate safety gear, including gloves and eye protection.
    2. Drain the System: Locate the radiator drain plug (petcock) at the bottom of the radiator and open it to drain the old coolant into a suitable container. Some models may also have drains on the engine block. Once drained, close the drain.
    3. Refill: Slowly add the correct Mopar OAT coolant (50/50 mix) to the coolant reservoir/expansion tank up to the "FULL" cold mark. Do not overfill.
    4. Bleeding (Air Removal): The 3.6L Pentastar engine is generally self-bleeding to an extent, but it still requires a careful process:
      • Start the engine with the heater set to full hot and the fan on low. Leave the radiator cap off (or reservoir cap, depending on system design) and observe the coolant level.
      • As the engine warms up, the thermostat will open, and coolant will begin to circulate. The coolant level in the reservoir may drop, so continue to top it off to the "FULL" mark as needed.
      • Look for bubbles rising in the reservoir. This indicates air escaping the system.
      • Squeeze the upper and lower radiator hoses gently several times to help dislodge air pockets.
      • Continue this process until the engine reaches operating temperature and no more bubbles are seen. The cooling fan should cycle on and off.
      • Install the radiator cap/reservoir cap.
    5. Final Check: After a test drive, allow the engine to cool completely and recheck the coolant level in the reservoir. Top off if necessary.

    For best results, especially after a complete drain, a vacuum-fill tool can be used to evacuate air from the system before refilling, ensuring a more thorough bleed.

    Common Cooling System Issues

    While the 2023 Ram ProMaster is a relatively new vehicle, the 3.6L Pentastar V6 engine has been around for some time, and certain cooling system issues have been noted across various Chrysler/Ram applications:

    • Thermostat Housing Leaks: The thermostat housing, often made of plastic, can be prone to cracking or gasket leaks over time, leading to coolant loss. Regularly inspect around the thermostat housing for any signs of pink/magenta coolant residue.
    • Water Pump Leaks: Water pump failures, typically presenting as a coolant leak from the weep hole or a grinding noise, can occur. While less common in newer vehicles, it's something to be aware of as the mileage accumulates.
    • Radiator Leaks: Road debris or age can cause damage to the radiator fins and tubes, leading to leaks. Visually inspect the radiator for any signs of damage or coolant stains.
    • Coolant Reservoir Cracks: The plastic coolant expansion tank can sometimes develop hairline cracks, particularly around hose connections or seams, resulting in slow coolant loss.
    • Heater Core Issues: Though less frequent, a clogged or leaking heater core can lead to a lack of cabin heat or a sweet smell inside the vehicle. Proper coolant maintenance helps prevent heater core clogging.

    Regular inspection of hoses for cracks or bulges, checking for coolant leaks, and adherence to the recommended maintenance schedule will help prevent most cooling system problems in your 2023 Ram ProMaster.

    Find a trusted shop on Repairius.

    Need service on your Ram ProMaster?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2023 Ram ProMaster

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-23.

    Driving or Managing a Fleet?

    Use Dispatchtool for truck navigation, driver communication, dispatching, and fleet management.

    Visit Dispatchtool
    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email