2023 Ram ProMaster Oil Capacity, Filter & Oil Change Guide
ASE Master Tech Reference for the 2023 Ram ProMaster 3.6L Pentastar V6
Working on this 2023 Ram ProMaster? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
2023 Ram ProMaster factory oil capacity
| Engine | Capacity | Oil | Filter |
|---|---|---|---|
| 3.6L | 6 qt (5.6 L) | SAE 0W-20 (first grade listed; see chart) | — |
Source: Mopar StarParts vehicle fluid specifications (FCA US LLC / Stellantis). Values as printed. Oil capacity finder →
The 2023 Ram ProMaster takes exactly 6.0 quarts (5.6 liters) of full synthetic 0W-20 motor oil when replacing both the oil and the filter. As an ASE-certified master technician, I regularly service these workhorse vans, and maintaining the proper oil level and using the correct specification is absolutely critical to keeping your 3.6L Pentastar V6 running reliably under heavy payload conditions.
Below is your comprehensive reference guide for servicing the oil on your 2023 Ram ProMaster.
Quick answer
Here is everything you need to know to complete an oil service on your 2023 ProMaster:
- Oil Capacity: 6.0 quarts (5.6 L) with filter change.
- Recommended Weight: 0W-20 Full Synthetic.
- Oil Specification: Chrysler Material Standard MS-6395 (API SP / ILSAC GF-6A).
- OEM Oil Filter Part Number: Mopar MO-349 (68191349AC) – Note: This is a cartridge-style filter.
- Popular Aftermarket Filters: Fram CH11665, WIX WL10010, Mobil 1 M1C-254A.
Capacity by engine option
For the 2023 model year, Ram streamlined the ProMaster lineup to feature a single, highly proven powertrain. There are no diesel or alternative engine options for this specific year.
| Engine | Oil Capacity (with filter) | Oil Viscosity |
|---|---|---|
| 3.6L Pentastar V6 | 6.0 Quarts (5.6 Liters) | 0W-20 |
Oil change interval
Because the ProMaster is a commercial vehicle, how you use it dictates how often you should change the oil. The van is equipped with an Automatic Oil Change Indicator System, but you should adhere to the following baselines:
- Normal Duty: Up to 10,000 miles or 12 months (whichever comes first). This applies if you drive mostly highway miles with light cargo.
- Severe Duty: Every 4,000 to 5,000 miles or 6 months. You fall into this category if you constantly drive in stop-and-go city traffic, operate in dusty environments, idle extensively (delivery routes), or frequently haul near the maximum payload capacity.
Never exceed 10,000 miles or 1 year between oil changes, regardless of what the dashboard indicator says.
Drain plug torque
- Torque Specification: 20 ft-lbs (27 Nm).
- Crush Washer Note: The 3.6L Pentastar oil pan uses a 13mm drain plug with an integrated rubber seal (O-ring) rather than a traditional metal crush washer. Inspect the rubber seal closely; if it is flattened, cracked, or leaking, replace the entire drain plug.
How to change the oil
The 3.6L Pentastar is renowned among technicians for being one of the easiest engines to service thanks to its top-mounted oil filter.
- Warm up the engine: Run the van for a few minutes to get the oil warm (but not scalding hot) so it drains faster and suspends contaminants.
- Access the filter: Open the hood and locate the oil filter housing on top of the engine (driver's side). Use a 24mm socket to loosen the plastic cap. Leave it sitting loose in the housing to allow the oil to drain down into the pan.
- Drain the oil: Safely raise the front of the vehicle if necessary. Locate the 13mm drain plug on the bottom of the oil pan. Remove it and let the oil drain completely into a catch pan.
- Reinstall drain plug: Clean the drain plug, inspect the rubber seal, and torque it to 20 ft-lbs.
- Replace the filter: Remove the top filter cap. Snap the old paper cartridge out of the cap. Remove the old O-ring from the plastic cap, lubricate the new O-ring (included with the new filter) with fresh oil, and install it. Snap the new filter cartridge into the cap.
- Torque the filter cap: Thread the cap back onto the housing and torque it to 18 ft-lbs (25 Nm). Do not overtighten, or you will crack the plastic housing!
- Refill and check: Pour 6.0 quarts of 0W-20 oil into the oil filler neck. Start the engine, check for leaks, shut it off, and verify the fluid level on the dipstick after a few minutes.
- Reset the oil light: Turn the ignition to the ON/RUN position (engine off). Fully press the accelerator pedal slowly three times within 10 seconds. Turn the ignition off.
Common issues / tips
- Oil Filter Housing Leaks: The most common issue on the 3.6L Pentastar is an oil leak from the plastic oil filter housing/oil cooler assembly located in the valley of the engine. Over-tightening the filter cap is a primary cause of stress cracks. Always use a torque wrench on the 24mm cap and stick to 18 ft-lbs.
- Top-Down Servicing: Always loosen the top oil filter cap before draining the oil from the pan. This breaks the anti-drain back valve vacuum and ensures all the dirty oil in the housing flows down into the pan before you plug it back up.
- 0W-20 vs 5W-20: Older Pentastar engines used 5W-20, but Ram updated the requirement to 0W-20 to meet stricter fuel economy and emissions standards. Stick to 0W-20 for your 2023 model to ensure proper variable valve timing (VVT) operation and warranty compliance.
Need an oil change? Find a trusted shop on Repairius.
Need service on your Ram ProMaster?
Your vehicle and question are already filled in — just add your location.
More specs for the 2023 Ram ProMaster
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2023 Ram ProMaster Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.
Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-09-18.