2024 Ram ProMaster Oil Capacity & Filter Specs
Working on this 2024 Ram ProMaster? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
2024 Ram ProMaster factory oil capacity
| Engine | Capacity | Oil | Filter |
|---|---|---|---|
| 3.6L | 6 qt (5.6 L) | SAE 0W-20 (first grade listed; see chart) | — |
Source: Mopar StarParts vehicle fluid specifications (FCA US LLC / Stellantis). Values as printed. Oil capacity finder →
The 2024 Ram ProMaster takes 5.5 quarts (5.2 liters) of 0W-20 synthetic oil.
Quick Answer
- Oil Capacity: 5.5 quarts (5.2 liters)
- Recommended Oil Weight: 0W-20
- Oil Type Specification: MOPAR MS-6395 (Chrysler Material Standard)
- Oil Filter:
- OEM: Mopar 68532431AA
- Fram: CH12995
- Wix: WL10010
- Mobil 1: M1C-458A
Capacity by Engine Option
| Engine | Oil Capacity | Oil Type Specification |
|---|---|---|
| 3.6L Pentastar V6 | 5.5 Quarts | MOPAR MS-6395 |
Oil Change Interval
Normal Duty: Ram recommends an oil change every 10,000 miles (16,000 km) or 12 months, whichever comes first.
Severe Duty: If your 2024 Ram ProMaster operates under severe conditions, such as frequent short trips, extensive idling, towing, or very dusty environments, an oil change is recommended every 5,000 miles (8,000 km) or 6 months.
Drain Plug Torque
The oil drain plug on the 2024 Ram ProMaster should be torqued to 20 ft-lbs (27 Nm). Always use a new drain plug crush washer (gasket) to ensure a proper seal and prevent leaks. The OEM crush washer part number is Mopar 68004313AA.
How to Change the Oil
- Warm up the engine: Drive the vehicle for 10-15 minutes to bring the oil to operating temperature, ensuring it drains more easily.
- Lift and secure: Safely lift the front of the ProMaster using a jack and secure it with jack stands. Always use appropriate safety measures.
- Locate drain plug: Place a suitable oil drain pan beneath the oil pan. Remove the drain plug with the correct wrench (typically 13mm or 1/2 inch) allowing the old oil to drain completely.
- Replace crush washer: Once the oil has drained, replace the drain plug with a new crush washer and tighten it to the specified torque of 20 ft-lbs (27 Nm).
- Remove oil filter: Locate the oil filter housing (on the top front of the engine, right side). Use an appropriate oil filter wrench to remove the cap, then pull out the old filter element. Clean the housing and replace the O-rings supplied with the new filter element. Insert the new filter.
- Install new filter: Hand-tighten the new filter housing cap until snug, then tighten to the specified torque (usually 25 Nm or 18 ft-lbs, consult the filter instructions or service manual if unsure).
- Add new oil: Lower the vehicle. Locate the oil fill cap on the engine and pour in 5.5 quarts of new 0W-20 synthetic oil.
- Check oil level: Start the engine and let it run for a few minutes. Turn it off, wait for a few minutes, then check the oil level on the dipstick. Add more oil if necessary to reach the "FULL" mark.
- Dispose of old oil: Properly dispose of used oil and the old filter at an approved recycling center.
Common Issues / Tips for the 2024 Ram ProMaster (VF Generation)
- Engine Bay Accessibility: The ProMaster's engine bay can be somewhat cramped, especially when accessing the oil filter housing. Having the right tools, including an oil filter wrench designed for cartridge filters, will make the job easier.
- Oil Type is Crucial: The 3.6L Pentastar V6 engine is designed for 0W-20 synthetic oil meeting the MOPAR MS-6395 specification. Using an incorrect oil weight or type can lead to reduced lubrication, increased wear, and potentially engine damage. Always stick to the recommended specifications.
- Check for Leaks: After completing the oil change, always inspect the drain plug and oil filter housing for any signs of leaks. It's a good practice to recheck after your first few drives.
- Oil Life Monitor (OLM): The 2024 Ram ProMaster is equipped with an Oil Life Monitor system. After changing the oil, be sure to reset the OLM according to the vehicle's owner's manual. This usually involves a sequence of button presses on the dashboard or through the infotainment system.
- Crush Washer Importance: Do not reuse the old crush washer on the drain plug. A new crush washer provides a proper seal and prevents oil leaks.
Need an oil change? Find a trusted shop on Repairius.
Need service on your Ram ProMaster?
Your vehicle and question are already filled in — just add your location.
More specs for the 2024 Ram ProMaster
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2024 Ram ProMaster Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.
Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-07-05.