Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Wheel Alignment Specifications

    2024 Ram ProMaster Wheel Alignment Specifications

    Working on this 2024 Ram ProMaster? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    2024 Ram ProMaster factory oil capacity

    EngineCapacityOilFilter
    3.6L6 qt (5.6 L)SAE 0W-20 (first grade listed; see chart)—

    Source: Mopar StarParts vehicle fluid specifications (FCA US LLC / Stellantis). Values as printed. Oil capacity finder →

    Quick reference

    AngleFront PrefFront RangeRear PrefRear Range
    Camber-0.25°-0.75° to 0.25°0.0°-0.5° to 0.5°
    Caster4.0°3.5° to 4.5°N/AN/A
    Total Toe0.10°0.05° to 0.15°0.05°0.0° to 0.10°
    Individual Toe0.05°0.025° to 0.075°0.025°0.0° to 0.05°
    SAI12.5°12.0° to 13.0°N/AN/A
    Thrust Angle0.0°-0.15° to 0.15°N/AN/A

    Adjustability

    On the 2024 Ram ProMaster, front toe is the primary factory-adjustable alignment angle. This is achieved by adjusting the tie rod ends. Front camber and caster are not directly adjustable from the factory. If these angles are outside of specification, it typically indicates a worn or damaged suspension component. In some cases, aftermarket solutions such as eccentric bushings, slotted struts, or adjustable control arms may be available to allow for camber and caster adjustments, but these are not OEM components. Rear camber and toe on the ProMaster are generally non-adjustable. Any deviation from the specified range usually points to a bent axle or other structural damage. Thrust angle is indirectly addressed by adjusting individual rear toe and ensuring the rear axle is centered.

    Recommended adjustment hardware

    For the 2024 Ram ProMaster, factory adjustments are limited to front toe. If front camber or caster are out of specification and you've ruled out worn components, you might consider aftermarket camber/caster adjustment kits. These usually involve replacing existing suspension bolts with eccentric bolts or installing new control arms with adjustable features. Consult with a suspension specialist or an alignment shop that specializes in commercial vehicles for appropriate recommendations and installation for your specific needs.

    Symptoms of bad alignment

    Ignoring alignment issues can lead to several problems, including premature tire wear, compromised handling, and reduced fuel efficiency. Here are some common symptoms:

    • Uneven Tire Wear: This is the most common indicator.
      • Feathering: If the tread blocks are worn smooth on one side and sharp on the other, it often points to excessive toe-in or toe-out.
      • Cupping/Scalloping: Potholes and worn shocks can also cause this, but also an indication of extreme toe-in or toe-out combined with worn suspension components resulting in up and down motion of the wheel as it travels.
      • Inner or Outer Edge Wear: Excessive positive or negative camber will cause accelerated wear on the inner or outer edge of the tire, respectively.
    • Vehicle Pulling: If your ProMaster consistently pulls to one side while driving straight, it's a strong sign of an alignment problem, often related to camber or caster differences between the front wheels, or excessive thrust angle.
    • Steering Wheel Not Centered: Even if the vehicle drives straight, a crooked steering wheel indicates an issue with the toe adjustment.
    • Loose or Wandering Steering: If the vehicle feels unstable or you have to constantly correct the steering to keep it going straight, improper toe or caster settings could be the cause.
    • Vibrations: While often related to tire balance, alignment issues can also contribute to vibrations, especially at higher speeds.

    When to align

    Regular wheel alignments are crucial for maintaining the performance and safety of your 2024 Ram ProMaster. Here are key situations when you should have your alignment checked:

    • After Suspension or Steering Component Replacement: Any time components like tie rods, ball joints, control arms, or struts are replaced, an alignment is necessary.
    • After Installing New Tires: To ensure you get the maximum lifespan out of your new tires and prevent premature wear, an alignment should always be performed.
    • After an Accident or Hitting a Large Pothole/Curb: Even a seemingly minor impact can knock your alignment out of specification.
    • Every 12,000 to 15,000 Miles or Annually: As a preventative measure, a regular alignment check can catch minor issues before they become significant problems.
    • When You Notice Any of the Above Symptoms: Don't wait for your next service interval if you observe uneven tire wear, pulling, or an off-center steering wheel.

    Typical alignment cost

    The cost of a wheel alignment for a 2024 Ram ProMaster can vary depending on your location, the shop you choose, and whether any additional parts or labor are required. Generally, you can expect to pay anywhere from $100 to $250 for a standard four-wheel alignment. If aftermarket adjustment components are needed or if there are seized components that require extra labor, the cost will be higher. It's always a good idea to get a quote from the shop before proceeding with the service.

    Find a trusted alignment shop on Repairius.

    Need service on your Ram ProMaster?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2024 Ram ProMaster

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-22.

    Driving or Managing a Fleet?

    Use Dispatchtool for truck navigation, driver communication, dispatching, and fleet management.

    Visit Dispatchtool
    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email