2018 Subaru Crosstrek Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2018 Subaru Crosstrek? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel lug nuts | 89 / 120 | Retorque after 50-100 miles |
| Oil drain plug | 31 / 42 | |
| Transmission drain plug | 25 / 34 | CVT models |
| Front brake caliper bracket bolts | 80 / 108 | |
| Front brake caliper slide pins | 22 / 30 | |
| Rear brake caliper bracket bolts | 48 / 65 | |
| Rear brake caliper slide pins | 20 / 27 | |
| Axle nut | 162 / 220 | Always use a new cotter pin |
| Spark plugs | 15 / 21 | |
| Valve cover bolts | 4.7 / 6.4 | Tighten in sequence |
| Intake manifold bolts | 19 / 26 | Tighten in sequence from center outwards |
Wheel lug torque pattern
For the 2018 Subaru Crosstrek, use a star or cross pattern to tighten the wheel lug nuts. This ensures even clamping force and prevents wheel hub distortion. Start with one lug nut, then tighten the one directly across from it. Move to the next lug nut and tighten the one opposite, continuing until all nuts are seated. Then, in the same pattern, torque them to their final specification.
Brake torque notes
Properly torquing brake components is critical for safety and performance. The brake caliper bracket bolts are a high-torque, critical fastener. Ensure they are clean and dry before installation. The caliper slide pins, by contrast, require a much lower torque. Overtightening can cause the pins to bind, leading to uneven pad wear and braking problems. Always use a calibrated torque wrench for these components.
Why torque matters
Torque is the rotational force applied to a fastener. Every bolt on your vehicle has a specific torque value for a reason. Undertightening can lead to parts loosening over time, causing rattles, vibrations, or even catastrophic failure. Overtightening can stretch and weaken the bolt, damage the threads, or warp the components being fastened. For critical fasteners like those in your suspension and brakes, proper torque is a matter of safety. For engine components, it ensures a leak-free seal and prevents damage to delicate parts. Using a torque wrench is not just for professionals; it's an essential tool for any DIY-er who wants the job done right.
Disclaimer: The information on this page is for general reference only. Critical fasteners should always be verified in the OEM service manual for your specific vehicle before any work is performed.
Find a trusted shop on Repairius.
More specs for the 2018 Subaru Crosstrek
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2018 Subaru Crosstrek Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.