2019 Subaru Crosstrek Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2019 Subaru Crosstrek? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 89.9 ft-lb / 122 Nm | Always re-torque after 50-100 miles |
| Oil Drain Plug | 30.8 ft-lb / 41.8 Nm | Replace crush washer with every oil change |
| Transmission Drain Plug (CVT) | 36.9 ft-lb / 50 Nm | Refer to OEM manual for specific procedure and fluid |
| Brake Caliper Bracket Bolts (Front) | 59 ft-lb / 80 Nm | Apply thread locker if specified by OEM |
| Brake Caliper Bracket Bolts (Rear) | 48.7 ft-lb / 66 Nm | Apply thread locker if specified by OEM |
| Brake Caliper Slide Pins | 25.8 ft-lb / 35 Nm | Apply appropriate grease to pins, avoid thread locker |
| Axle Nut | 159.3 ft-lb / 216 Nm | Use a new axle nut; stake or secure as per OEM |
| Spark Plugs | 15.2 ft-lb / 20.6 Nm | Use a torque wrench to avoid overtightening or stripping threads |
| Valve Cover Bolts | 5.1 ft-lb / 6.9 Nm | Tighten in a specific sequence to prevent leaks |
| Intake Manifold Bolts | 18 ft-lb / 24.4 Nm | Tighten in a specific sequence to ensure even sealing |
Wheel lug torque pattern
For the 2019 Subaru Crosstrek, the wheel lug nuts should be tightened in a star pattern (also known as a cross pattern). This ensures even pressure distribution across the wheel hub, preventing warping of the rotor or wheel and ensuring secure seating. After snugging all nuts, tighten them to the final specified torque in the same star pattern. It's crucial to re-check the torque after driving 50-100 miles, as the nuts can settle.
Brake torque notes
When servicing the brakes on your 2019 Subaru Crosstrek, proper torque for the caliper bracket bolts and slide pins is essential for safety and performance. Brake caliper bracket bolts are high-stress fasteners and often require thread locker (typically blue Loctite) as specified by Subaru to prevent them from loosening. Always ensure the threads are clean before applying thread locker and tightening. Brake caliper slide pins, on the other hand, require a specific type of high-temperature grease to allow the caliper to float freely. Never apply thread locker to slide pins, as this will impede their movement and cause brake issues. Always refer to your OEM service manual for the exact procedure for brake component installation, including any specific tightening sequences or additional steps.
Why torque matters
Proper fastener torque is paramount for the safety, reliability, and longevity of your 2019 Subaru Crosstrek. Under-torquing a fastener can lead to it loosening over time due to vibrations and stress, potentially causing catastrophic component failure. For example, loose wheel lug nuts can lead to a wheel detaching, and an under-torqued oil drain plug can cause an oil leak, leading to engine damage. Conversely, over-torquing can stretch or strip threads, damage the fastener itself, or deform the components being joined. This can compromise the structural integrity of parts like brake calipers, engine components, or suspension parts. For critical components, even slight over-torquing can dramatically reduce the lifespan of the fastener or the part it's holding. Using a calibrated torque wrench and following manufacturer specifications ensures that each fastener provides the correct clamping force, distributing loads evenly and preventing premature wear or failure.
Disclaimer: Always consult the official 2019 Subaru Crosstrek OEM service manual for the most accurate and up-to-date torque specifications and procedures. This article provides general guidelines and should not replace the detailed information found in the manufacturer's manual, especially for critical safety components.
Find a trusted shop on Repairius.
More specs for the 2019 Subaru Crosstrek
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2019 Subaru Crosstrek Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.