2019 Subaru Outback Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2019 Subaru Outback? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel lug nuts | 89 / 120 | |
| Oil drain plug | 31 / 42 | |
| Transmission drain plug | 18 / 24 | |
| Front brake caliper bracket bolts | 80 / 108 | |
| Rear brake caliper bracket bolts | 65 / 88 | |
| Front brake caliper slide pins | 20 / 27 | |
| Rear brake caliper slide pins | 20 / 27 | |
| Front axle nut | 162 / 220 | |
| Spark plugs | 15 / 20 | |
| Valve cover bolts | 5 / 7 | In sequence |
Wheel lug torque pattern
When tightening the wheel lug nuts on your 2019 Subaru Outback, it's crucial to follow a star or cross pattern. This ensures the wheel is seated evenly against the hub, preventing warping of the brake rotor and ensuring a secure fit. Start with one lug nut, then tighten the one directly across from it. Move to the next lug nut and tighten the one opposite it, continuing until all lug nuts are snug. Once snug, use a torque wrench to apply the final torque in the same star pattern.
Brake torque notes
Proper torque on brake components is a critical safety measure. The caliper bracket bolts are a primary area of concern, as they secure the entire brake caliper assembly to the knuckle. Always use a calibrated torque wrench for these bolts. The caliper slide pins, which allow the caliper to move freely, should be tightened to their specified torque to ensure proper brake function. Over-tightening can damage the pins or caliper, while under-tightening can lead to noise or, in a worst-case scenario, the caliper detaching.
Before reassembly, it is best practice to clean all brake components and apply a high-quality synthetic brake grease to the slide pins and the contact points of the brake pads on the caliper bracket. This will ensure smooth, quiet brake operation.
Why torque matters
Every fastener on your vehicle has a specific torque value for a reason. This value is determined by the fastener's size, material, and the load it's designed to carry. Applying the correct torque ensures that the fastener is stretched to the right amount, creating the clamping force needed to hold parts together securely. Too little torque and the fastener can vibrate loose; too much and you can stretch the bolt past its yield point, permanently weakening it, or damage the parts it's holding together. A torque wrench is a small investment that pays for itself in safety and peace of mind
Disclaimer: The torque specifications listed above are for general reference only. Critical fasteners should always be verified in the OEM service manual for your specific vehicle. An OEM service manual is the most reliable source for torque specifications and should be consulted for any critical fastener.
Find a trusted shop on Repairius.
More specs for the 2019 Subaru Outback
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2019 Subaru Outback Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.