2025 Toyota Camry Fuse Box Diagram & Amperage Guide

Quick answer

The 2025 Toyota Camry features multiple fuse box locations to protect its electrical systems. You'll typically find fuse boxes in three main areas: under the hood, behind the driver's side dashboard kick panel, and in the trunk/cargo area.

Under-Hood Fuse Box

The under-hood fuse box, usually located near the battery, houses fuses and relays for critical engine components, lighting, and other high-current systems.

Common Relays (Under-Hood):

• EFI Main Relay: Controls power to the engine's electronic fuel injection system and ECM/PCM.
• Fuel Pump Relay: Powers the fuel pump.
• H-LP Main Relay: Controls power to the headlights.
• STR Relay: Engages the starter motor.
• A/C Clutch Relay: Activates the A/C compressor clutch.
• HORN Relay: Powers the horn.

Dash Fuse Box (Driver's Side Kick Panel)

This fuse box, often located behind a removable panel on the driver's side kick panel, protects various interior electrical components and accessories.

Trunk/Cargo Area Fuse Box

In some 2025 Toyota Camry models, particularly those with advanced features or hybrid systems, a third fuse box may be located in the trunk or cargo area. This fuse box typically handles power for specific rear-mounted components or high-voltage hybrid system circuits.

The specific configuration can vary by trim level (e.g., LE, SE, XLE, XSE, Hybrid) and optional features. Always refer to the fuse diagram printed on the fuse box lid or in your owner's manual for the most accurate information for your specific vehicle.

How to Test a Fuse

Testing a fuse is a straightforward process:

1. Locate the fuse box: Identify the correct fuse box for the circuit you're troubleshooting.
2. Identify the suspected fuse: Use the diagram on the fuse box lid or in your owner's manual to find the fuse for the problematic component.
3. Visual inspection: Pull the fuse out. A good fuse will have a continuous wire filament inside. A blown fuse will have a broken or melted filament.
4. Use a fuse tester/multimeter: For a more accurate test, use a fuse tester or set a multimeter to the continuity setting. Touch the probes to the test points on top of the fuse. A good fuse will show continuity; a blown fuse will show an open circuit.
5. Replace with the correct fuse: If the fuse is blown, replace it with a new fuse of the exact same amperage rating and type (mini, ATO, Maxi, etc.). Using an incorrect fuse can cause damage to the electrical system or even a fire.

Common Blown Fuses on This Vehicle

While fuse failures can occur in any circuit, some are more common due to frequent use or component wear. On the 2025 Toyota Camry, common blown fuses might include:

• CIG / 12V Power Outlet fuses (15A/20A): Often blow due to short circuits from overloaded accessories or faulty chargers.
• Radio / Infotainment fuse (15A): Can blow if an aftermarket head unit is installed improperly or if there's a fault within the system.
• Blower Motor fuse (20A/30A): High usage of the HVAC system can sometimes lead to this fuse blowing, especially if the blower motor is starting to fail or bind.
• Headlight / Tail Light fuses (10A): While less common with modern LED lighting, an internal short in a bulb or wiring issue could cause these to blow.

What to check first: If you experience a sudden electrical problem, always check the corresponding fuse first. If a fuse repeatedly blows after replacement, it indicates a deeper issue such as a short circuit in the wiring or a faulty component that needs professional diagnosis.

Find a trusted shop on Repairius.