2015 Toyota Highlander Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2015 Toyota Highlander? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick Reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 76 ft-lb / 103 Nm | |
| Oil Drain Plug | 30 ft-lb / 41 Nm | |
| Transmission Drain Plug | 36 ft-lb / 49 Nm | |
| Front Brake Caliper Bracket Bolts | 79 ft-lb / 107 Nm | |
| Rear Brake Caliper Bracket Bolts | 58 ft-lb / 79 Nm | |
| Front Brake Caliper Slide Pins | 25 ft-lb / 34 Nm | |
| Rear Brake Caliper Slide Pins | 25 ft-lb / 34 Nm | |
| Axle Nut | 217 ft-lb / 294 Nm | |
| Spark Plugs | 15 ft-lb / 20 Nm | For V6 models |
| Valve Cover Bolts | 8 ft-lb / 11 Nm | For V6 models |
| Intake Manifold Bolts | 13 ft-lb / 18 Nm | For V6 models |
Wheel Lug Torque Pattern
When tightening the wheel lug nuts on your 2015 Toyota Highlander, it is crucial to follow a star or cross pattern. This ensures that the wheel is seated evenly against the hub, preventing warping of the brake rotors and ensuring a secure fit. Start with one lug nut, then tighten the one directly across from it. Move to the next lug nut and tighten the one opposite it, continuing until all lug nuts are snug. Finally, lower the vehicle and use a torque wrench to tighten all lug nuts to the final specification in the same star pattern.
Brake Torque Notes
Proper torque on brake components is critical for safety and performance. The brake caliper bracket bolts are a high-torque, critical fastener. Ensure the threads are clean and dry before tightening. Never reuse caliper bracket bolts, as they are often one-time-use fasteners. The caliper slide pins, on the other hand, require a much lower torque. Overtightening can cause the pins to bind, leading to uneven pad wear and braking problems. Always use a high-temperature brake grease on the slide pins.
Why Torque Matters
Using a torque wrench to tighten fasteners to their specified torque is one of the most important aspects of auto repair. Overtightening a fastener can cause it to stretch and yield, weakening its clamping force and potentially leading to failure. Undertightening can allow a component to loosen over time, which can be catastrophic in the case of a wheel or brake caliper. A torque wrench is a precision instrument that every DIY mechanic should have in their toolbox.
Disclaimer: The information on this page is for informational purposes only. Critical fasteners should always be verified in the OEM service manual before beginning any work. Repairius is not liable for any damage or injury resulting from the use of this information.
Find a trusted shop on Repairius.
More specs for the 2015 Toyota Highlander
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2015 Toyota Highlander Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.