2019 Toyota Highlander Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2019 Toyota Highlander? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 76 ft-lb / 103 Nm | Always torque in a star pattern |
| Oil Drain Plug | 30 ft-lb / 41 Nm | Use a new crush washer |
| Transmission Drain Plug | 35 ft-lb / 47 Nm | On automatic transmission models |
| Brake Caliper Bracket Bolts | 87 ft-lb / 118 Nm | Front; check rear for variations |
| Brake Caliper Slide Pins | 25 ft-lb / 34 Nm | Apply high-temp grease to pins |
| Front Axle Nut | 160 ft-lb / 217 Nm | Always replace with new nut |
| Spark Plugs | 13 ft-lb / 18 Nm | For 3.5L V6 engine |
| Valve Cover Bolts | 7.5 ft-lb / 10 Nm | Torque in sequence to avoid warpage |
| Intake Manifold Bolts | 13 ft-lb / 18 Nm | Torque in sequence |
Wheel lug torque pattern
For the 2019 Toyota Highlander, the wheel lug nuts should always be torqued in a star pattern. This ensures even pressure distribution across the wheel hub, preventing warping of the brake rotor and ensuring the wheel is securely seated. Tighten the lug nuts in several passes, gradually increasing the torque to the final specification.
Brake torque notes
When working on the brakes of your 2019 Toyota Highlander, attention to detail is crucial. Brake caliper bracket bolts are critical safety components. Ensure they are torqued to specification and consider using thread-locking compound if recommended by the OEM. Brake caliper slide pins, while not under the same extreme stress, are vital for proper caliper movement and even pad wear. Always apply a high-temperature, silicone-based grease to the slide pins to ensure smooth operation and prevent seizing. Always replace any one-time use fasteners, such as axle nuts, with new parts as specified by Toyota.
Why torque matters
Properly torquing fasteners is not just a suggestion; it's a fundamental aspect of vehicle safety and longevity. Under-torquing can lead to components loosening over time, potentially causing rattles, leaks, or even catastrophic failure. For example, loose wheel lug nuts can cause a wheel to detach, and an under-torqued oil drain plug can lead to oil leaks and engine damage. Conversely, over-torquing can stretch and weaken bolts, strip threads, or crack components. This is especially true for delicate parts like valve covers or spark plugs, where excessive force can lead to expensive repairs or compromised sealing. Fasteners like axle nuts are designed to be torqued precisely to maintain proper bearing preload and prevent premature wear or failure of wheel bearings.
Following manufacturer-specified torque values ensures that every component is held with the correct clamping force, allowing your 2019 Toyota Highlander to operate as designed, safely and reliably. Always use a calibrated torque wrench and follow the correct tightening sequences where applicable.
Disclaimer: While these specifications are diligently compiled, it is always recommended to verify critical fastener torque values with the official OEM service manual for your specific 2019 Toyota Highlander model and engine configuration. This information is for reference purposes and should not supersede professional automotive advice or official manufacturer documentation.
Find a trusted shop on Repairius.
More specs for the 2019 Toyota Highlander
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2019 Toyota Highlander Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.