2016 Toyota Tundra Wiper Blade Sizes & Replacement Guide

When visibility drops on the highway or the trails, you need to trust the wiper blades on your 2016 Toyota Tundra. As a parts counter expert, I've seen firsthand how often Tundra owners put off changing their wipers until a heavy downpour hits. To keep your windshield clear and your drives safe, you need the right sizes and a quality blade. Here is your complete guide to 2016 Toyota Tundra wiper blades.

Quick reference

For the 2016 Toyota Tundra, you only need to worry about the front windshield, as this truck is not equipped with a rear wiper.

Note: OEM part numbers may sometimes be superseded by newer Toyota SightLine part numbers.

Best aftermarket replacements

If you prefer to skip the dealership and upgrade to a premium aftermarket option, the 2016 Tundra has plenty of great choices. Because the Tundra uses a highly universal attachment, virtually all major brands will fit perfectly.

• Bosch ICON: Premium tier ($$$). These beam-style blades are top-tier for a reason, offering excellent longevity, consistent pressure across the massive Tundra windshield, and premium weather resistance.
• Rain-X Latitude: Premium tier ($$$). Another excellent beam blade, renowned for its water-repelling coating that treats your glass as it wipes.
• PIAA Si-Tech: Premium tier ($$$). Silicone-based blades that outlast standard rubber, perfect if your Tundra sits outside in extreme heat or freezing cold.
• Trico Force: Mid-to-High tier ($$). A robust, high-wind beam blade that stays planted against the glass at highway speeds.
• Michelin Stealth: Mid tier ($$). A reliable hybrid blade that blends the aerodynamic cover of a beam blade with the flexibility of a traditional frame.

Attachment style

Your 2016 Toyota Tundra uses the classic standard J-hook attachment (specifically the 9x3mm hook). This is the most common and widely supported wiper arm style on the market. You won't need to fumble with tiny, confusing plastic adapters; most aftermarket blades come ready to click directly into a J-hook right out of the box.

How to install

Replacing the wiper blades on your Tundra is a simple job that should only take a couple of minutes.

1. Lift the wiper arm: Pull the wiper arm away from the windshield until it locks into a standing position. Be careful not to bump it, as a bare metal arm snapping back can crack the windshield.
2. Remove the old blade: Locate the small plastic tab on the underside of the wiper where it meets the hook. Press the tab and push the blade down toward the base of the wiper arm to slide it out of the hook.
3. Position the new blade: Slide the new wiper blade into the J-hook.
4. Lock it in: Pull the blade upward into the hook until you hear and feel a firm "click."
5. Test: Gently place the arm back onto the windshield and test the wipers with some washer fluid to ensure they are seated correctly.

When to replace

For optimal safety, you should replace your wiper blades every 6 to 12 months. The heavy-duty rubber takes a beating from UV rays, road grime, and extreme weather.

Watch out for these classic signs of failure:

• Streaking: Leaving lines of water directly in your line of sight.
• Chattering: The blade skipping or vibrating across the glass rather than gliding smoothly.
• Squeaking: High-pitched noises indicating the rubber has dried out.
• Tearing: Visible cracks or missing chunks of rubber on the squeegee edge.

Need wipers swapped fast? Find a shop on Repairius.