2019 Toyota Tundra Torque Specifications

<h2>Quick reference</h2>

Fastener	Torque (ft-lb / Nm)	Notes
Wheel Lug Nuts	97 ft-lb / 131 Nm
Oil Drain Plug	30 ft-lb / 41 Nm
Transmission Drain Plug (Automatic)	19-36 ft-lb / 26-49 Nm	Torque values vary by specific transmission and pan material. Consult OEM manual.
Brake Caliper Bracket Bolts (Front)	100-110 ft-lb / 136-149 Nm
Brake Caliper Bracket Bolts (Rear)	65-75 ft-lb / 88-102 Nm
Brake Caliper Slide Pins	25 ft-lb / 34 Nm	Ensure pins are clean and lubricated with appropriate high-temperature grease.
Axle Nut	165 ft-lb / 224 Nm (Front)	Refer to OEM for specific rear axle nut torque if applicable to your configuration.
Spark Plugs	13-15 ft-lb / 18-20 Nm	For 5.7L V8 engine. Ensure threads are clean and free of debris.
Valve Cover Bolts	9 ft-lb / 12 Nm
Intake Manifold Bolts	14 ft-lb / 19 Nm	For upper intake manifold on 5.7L V8.

<h2>Wheel lug torque pattern</h2>

For the 2019 Toyota Tundra, the wheel lug nuts should be tightened in a star or cross pattern. This ensures even pressure across the wheel hub and prevents rotor warping or wheel distortion. Gradually tighten the nuts in several passes until the final torque specification is reached.

<h2>Brake torque notes</h2>

When working on the braking system of your 2019 Toyota Tundra, proper torque application is paramount for safety and performance. Brake caliper bracket bolts are critical to holding the caliper assembly in place, and incorrect torque can lead to loose components or shearing. Always ensure that the threads are clean and free of rust or old thread locker before reassembly. Brake caliper slide pins, while requiring less torque, are equally important. They allow the caliper to move freely and clamp onto the rotor evenly. Proper lubrication with high-temperature silicone grease and correct torque on these pins will prevent uneven pad wear and potential braking issues. Always replace any damaged or corroded brake hardware. Refer to your OEM service manual for any specific tightening sequences or additional torque specifications related to brake components.

<h2>Why torque matters</h2>

Applying the correct torque to fasteners is more than just tightening until it "feels right." It's a precise science that ensures the bolt is stretched to its optimal tension, providing maximum clamping force without overstressing the material. Under-torqued fasteners can loosen over time, leading to critical component failure, vibrations, and safety hazards. For instance, loose wheel lug nuts can cause a wheel to detach, and an under-torqued oil drain plug can lead to oil leaks and engine damage. Conversely, over-torquing can stretch and weaken bolts, strip threads, or crack components. This can be equally dangerous, as an over-tightened bolt is more prone to breaking under stress. Critical components like those in the braking system, suspension, and engine rely heavily on accurate torque specifications for their safe and reliable operation. Always use a calibrated torque wrench and follow manufacturer specifications. Remember that these values are for dry, clean threads unless otherwise specified. The use of lubricants or thread lockers can change the effective torque required.

---

Disclaimer: The torque specifications provided are for informational purposes only. Always consult your official 2019 Toyota Tundra OEM factory service manual for the most accurate and up-to-date specifications for your specific vehicle configuration. Critical fasteners should always be verified in the OEM service manual to ensure safety and proper function.

Find a trusted shop on Repairius.