2014 Toyota Tundra Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2014 Toyota Tundra? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick Reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 97 ft-lb (131 Nm) | Star/cross pattern |
| Oil Drain Plug | 30 ft-lb (41 Nm) | Crush washer recommended |
| Transmission Drain Plug | 15-20 ft-lb (20-27 Nm) | Verify in OEM manual; some models use a pan gasket |
| Front Brake Caliper Bracket Bolts | 137 ft-lb (186 Nm) | Use new bolts if specified by OEM |
| Rear Brake Caliper Bracket Bolts | 74 ft-lb (100 Nm) | Use new bolts if specified by OEM |
| Front Brake Caliper Slide Pins | 25 ft-lb (34 Nm) | Apply appropriate grease |
| Rear Brake Caliper Slide Pins | 18 ft-lb (24 Nm) | Apply appropriate grease |
| Front Axle Nut | 195 ft-lb (264 Nm) | Check manufacturer for specific procedure and cotter pin installation |
| Rear Axle Flange Bolts | 59 ft-lb (80 Nm) | Evenly tighten |
| Spark Plugs | 13-15 ft-lb (18-20 Nm) | For 4.0L V6 and 5.7L V8 engines |
| Valve Cover Bolts | 7-9 ft-lb (9-12 Nm) | Tighten in sequence to prevent warping |
| Intake Manifold Bolts | 14-15 ft-lb (19-20 Nm) | Tighten in sequence |
Wheel Lug Torque Pattern
For the 2014 Toyota Tundra, the wheel lug nuts should be tightened in a star or cross pattern. This ensures even seating of the wheel against the hub, preventing warping of the rotor and ensuring secure attachment. After driving for approximately 50-100 miles, it is good practice to re-check the lug nut torque to ensure they remain properly tightened.
Brake Torque Notes
Properly torquing brake components is paramount for safety. For the 2014 Toyota Tundra, it's crucial to ensure brake caliper bracket bolts are tightened to the specified value. These bolts bear the brunt of braking forces, and if improperly torqued, can lead to dangerous situations. Brake caliper slide pins, while not subject to the same high forces as the bracket bolts, are essential for the caliper to move freely and apply even pressure to the rotor. Using the correct lubricant on these pins is as important as the torque value itself. In some cases, the OEM may specify using new bolts for brake caliper brackets; always follow these recommendations.
Why Torque Matters
Applying the correct torque to fasteners is not just a suggestion; it's a critical aspect of vehicle maintenance and repair. Under-torquing can lead to fasteners loosening over time, potentially causing components to detach or fail, which can have catastrophic consequences. This is especially true for critical components like wheel lug nuts, brake components, and engine internals. Over-torquing, on the other hand, can strip threads, stretch bolts, or even crack components, leading to damage that might not be immediately apparent but can compromise the long-term integrity and safety of the vehicle. For components with gaskets, like the oil pan or valve cover, incorrect torque can lead to leaks. Always use a calibrated torque wrench and follow manufacturer specifications. While this guide provides common torque values for the 2014 Toyota Tundra, always consult the official Toyota Tundra service manual for the most accurate and comprehensive information for your specific vehicle configuration.
Disclaimer: Always verify critical fastener torque specifications with the OEM service manual for your specific vehicle. The values provided here are for general reference and may vary based on model, engine, and specific component.
Find a trusted shop on Repairius.
More specs for the 2014 Toyota Tundra
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2014 Toyota Tundra Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.