2020 Ford Escape Paint Color Codes & Touch-Up Guide

Whether you are covering up a minor parking lot scratch or touching up rock chips on the hood, finding the exact paint code for your 2020 Ford Escape is the crucial first step to a flawless repair. Ford redesigned the Escape for the 2020 model year, offering a vibrant palette of exterior colors that range from classic solids to stunning multi-stage pearls.

Here is your comprehensive guide to the 2020 Ford Escape paint color codes, where to locate your vehicle's specific code, and how to properly apply touch-up paint.

Quick reference

Below is the complete list of factory paint colors offered for the 2020 Ford Escape. Always verify your specific code before ordering paint.

Color Name	Paint Code	Type (Solid / Metallic / Pearl)
Oxford White	YZ (or Z1)	Solid
Agate Black	UM	Metallic
Magnetic	J7	Metallic
Ingot Silver	UX	Metallic
Velocity Blue	E7	Metallic
Dark Persian Green	D9	Metallic
Sedona Orange	BP	Metallic
Desert Gold	G6	Metallic
Rapid Red	D4	Tri-coat / Pearl
Star White	AZ	Tri-coat / Pearl

Note: If you are uncertain about your specific color, we highly recommend confirming your paint code via your VIN at a local Ford dealer or a trusted paint supplier.

Where to find your paint code

Ford makes it relatively straightforward to find your exact paint code. For the 2020 Ford Escape, you will need to locate the Vehicle Certification (VC) Label.

1. Open your driver’s side door.
2. Look at the B-pillar or the door edge (the door jamb). You will see a large rectangular sticker with various vehicle weights, bar codes, and tire information.
3. Look near the bottom left or bottom center of this sticker for the text "EXT PNT" (Exterior Paint).
4. Directly below or next to "EXT PNT," you will see a two-character code (consisting of letters and/or numbers). This is your factory paint code (e.g., UM for Agate Black).

Best touch-up paint sources

Getting a high-quality color match requires buying paint from a reputable source. Here are the top recommendations for sourcing 2020 Ford Escape touch-up paint:

• Dupli-Color: A highly accessible choice available at most auto parts stores. They offer Exact-Match pens and aerosols that are perfect for standard solid and metallic colors like Oxford White and Magnetic.
• AutomotiveTouchup: Known for precision, they custom-mix paint based on your exact factory code. They offer paint pens, small brush bottles, aerosols, and even ready-to-spray pints for larger jobs.
• Tcoat custom-mix: An excellent premium option for custom-mixed batches that account for the natural fading of older vehicles, providing exceptional color blending.
• Ford Dealership: The Motorcraft touch-up pens available at the dealer parts counter are guaranteed factory matches. They often come with an abrasive prep tip, the color coat, and a clear coat in one convenient tool.

How to use touch-up paint

For a repair that blends seamlessly and prevents future rust, follow these essential steps:

1. Clean: Thoroughly wash the area with soap and water. Once dry, use a wax and grease remover (or rubbing alcohol) to eliminate any contaminants that could prevent the paint from adhering properly.
2. Primer: If the scratch goes all the way down to bare metal or plastic, apply a thin layer of automotive primer. Let it dry completely according to the manufacturer's instructions.
3. Base Coat: Apply the color coat in light, thin layers. Do not try to fill the scratch all at once, as this will lead to bubbling and runs. Wait 10 to 15 minutes between coats until the scratch is filled just below the level of the surrounding paint.
4. Clear Coat: Once the base coat is fully dry (usually 30-60 minutes), apply the clear coat. The clear coat provides the glossy finish and protects the base color from UV rays and weather.

Color matching tips for pearls and tri-coats

If your 2020 Ford Escape is painted in Star White (AZ) or Rapid Red (D4), you are dealing with a tri-coat (or three-stage) paint system. These paints consist of a solid base coat, a translucent pearl mid-coat, and a protective clear coat.

• Test first: Always practice on a glossy piece of scrap metal or cardboard first. Tri-coats rely on the thickness of the pearl mid-coat to achieve the correct shade.
• Layering: Apply the base coat until opaque. Then, apply the pearl mid-coat one thin layer at a time. Compare the test card to your vehicle after each layer of pearl until the sparkle and depth match the factory finish.
• Blend carefully: Multi-stage paints are notoriously difficult to touch up seamlessly using a brush. For areas larger than a pencil eraser, aerosol sprays or professional airbrushing will yield significantly better results.

Whether it is a tiny nick or a larger scrape, taking your time with prep and application will yield the best results. However, if the damage spans across multiple panels or requires complex dent repair, it might be time to call in the professionals.

Find a trusted body shop on Repairius.