2019 Ford Escape Paint Codes

Quick reference

Where to find your paint code

For most 2019 Ford Escape vehicles, you’ll find your paint code on a sticker located on the driver’s side door jamb. Open the driver's door and look for a white or silver label that contains various vehicle information. The paint code is usually listed under the "EXT PNT" or "EXTERIOR PAINT" heading. It will be a two-character code, which may be followed by a letter or number indicating the specific shade or factory. In some cases, the sticker might be on the B-pillar (the pillar between the front and rear doors).

If you have trouble locating it, you can also check your owner's manual or contact a Ford dealership with your VIN; they can provide you with the exact paint code for your vehicle.

Best touch-up paint sources

When it comes to touching up minor scratches or chips on your 2019 Ford Escape, several reputable sources offer quality products:

• Dupli-Color: A widely available brand that offers touch-up pens, paint bottles, and spray cans in a broad range of factory colors. You can often find Dupli-Color products at automotive parts stores.
• AutomotiveTouchup: This company specializes in custom-mixed touch-up paint that precisely matches your vehicle's factory color. They offer pens, bottles, spray cans, and even larger quantities for more significant repairs. Their custom-matched paint is highly regarded for accuracy.
• Tcoat Custom-Mix: Similar to AutomotiveTouchup, Tcoat provides custom-blended paint to perfectly match your vehicle's specific color code. They are known for high-quality formulations, especially for metallic and pearl finishes.
• Dealership: Your local Ford dealership can also provide OEM touch-up paint specifically designed for your 2019 Escape. While sometimes pricier, it guarantees an exact factory match.

How to use touch-up paint

Achieving a seamless touch-up requires a few key steps:

1. Clean the area: Thoroughly clean the chipped or scratched area with soap and water, then dry it completely. You may use a wax and grease remover for optimal adhesion.
2. Apply primer (if necessary): For deeper scratches that go down to the bare metal, apply a thin coat of primer. Allow it to dry completely according to the product instructions.
3. Apply base coat: Shake the touch-up paint well. Apply thin, even coats of the base color, allowing each coat to dry for the recommended time before applying the next. Build up the paint slowly until it's level with the surrounding surface.
4. Apply clear coat: Once the base coat is dry, apply a clear coat. This protects the paint and provides a glossy finish. Again, apply in thin, even layers.
5. Cure and polish: Allow the touch-up paint to cure fully (this can take several days). Once cured, you can gently polish the area to blend it in with the surrounding paintwork.

Color matching tips for pearls and tri-coats

Pearl (like White Platinum) and tri-coat finishes add an extra layer of complexity to color matching. These paints achieve their depth and shimmer through multiple layers:

• Pearl finishes: Contain mica flakes that give them a pearlescent effect. Matching this effect requires careful application of the pearl mid-coat, often in conjunction with a specific ground coat color.
• Tri-coat finishes: Involve three distinct layers: a ground coat, a translucent mid-coat (often pearl or tinted), and a clear coat. Each layer contributes to the final color and effect. It is crucial to apply all three layers correctly for a proper match.

When working with pearl or tri-coat colors, it's especially important to:

• Test on a discreet area: Always test your touch-up paint on an inconspicuous spot (like inside the fuel door) or a test card to ensure the color and effect match before applying it to the visible damage.
• Apply thin coats: This is critical for building up the color and pearlescent effect gradually and evenly.
• Consider professional help: For larger repairs or if you're unsure about matching metallic, pearl, or tri-coat finishes, it might be best to consult a professional body shop. They have the expertise and equipment to achieve a flawless match.

Always confirm your paint code with your VIN at a dealership or reputable paint supplier to ensure accuracy, especially for complex colors.

Find a trusted body shop on Repairius.