2025 Ford Escape: Oil Capacity & Filter Guide
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2025 Ford Escape? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick Answer
The 2025 Ford Escape requires between 4.8 and 5.7 quarts (4.5 to 5.4 liters) of oil, depending on the engine. All engines use a spin-on oil filter, OEM part number FL-910S.
- Oil Capacity (1.5L EcoBoost): 4.8 quarts / 4.5 liters
- Oil Capacity (2.0L EcoBoost): 5.7 quarts / 5.4 liters
- Oil Capacity (2.5L Hybrid & PHEV): 4.8 quarts / 4.5 liters
- Recommended Oil Weight: 5W-20 (1.5L), 5W-30 (2.0L), or 0W-20 (2.5L Hybrid)
- Oil Specification: Ford WSS-M2C945-B1 / API SP (1.5L), WSS-M2C946-B1 / API SP (2.0L), WSS-M2C947-B1 / API SP (2.5L)
- Oil Filter (OEM): Motorcraft FL-910S
- Oil Filter (Aftermarket): Fram PH3614, WIX 51348, Mobil 1 M1-102A
Capacity by Engine Option
| Engine | Oil Capacity (with filter) | Recommended Viscosity | Ford Oil Specification |
|---|---|---|---|
| 1.5L EcoBoost I-3 | 4.8 qts (4.5L) | SAE 5W-20 | WSS-M2C945-B1 |
| 2.0L EcoBoost I-4 | 5.7 qts (5.4L) | SAE 5W-30 | WSS-M2C946-B1 |
| 2.5L Hybrid/PHEV I-4 | 4.8 qts (4.5L) | SAE 0W-20 | WSS-M2C947-B1 |
Oil Change Interval
The 2025 Ford Escape is equipped with an Intelligent Oil-Life Monitor (IOLM) that determines the optimal oil change interval based on driving habits. However, Ford provides general guidelines:
- Normal Duty: Change the oil every 7,500–10,000 miles or once a year, whichever comes first. The IOLM will notify you when it's time.
- Severe Duty: Change the oil every 3,000–5,000 miles. Severe duty includes frequent towing, extensive idling, driving in dusty conditions, or making many short trips.
Drain Plug Torque
Properly tightening the oil drain plug is crucial to prevent leaks.
- Drain Plug Torque: 21 lb-ft (28 Nm)
- Note: Always use a new crush washer on the drain plug to ensure a proper seal. Consult your local dealer for the exact part number.
How to Change the Oil
- Warm up the engine for a few minutes to help the oil drain more easily.
- Safely raise and support the vehicle on a level surface.
- Place a drain pan under the oil pan and remove the 15mm drain plug.
- Once the oil has drained, locate and remove the oil filter. Be prepared for some oil spillage.
- Wipe the filter mounting surface clean and apply a thin layer of new oil to the gasket of the new filter.
- Install the new filter and tighten it hand-tight plus a quarter turn.
- Reinstall the drain plug with a new crush washer and torque it to 21 lb-ft.
- Fill the engine with the correct amount and type of oil.
- Start the engine, let it run for a minute, then shut it off and re-check the oil level, topping off as needed.
- Reset the Oil-Life Monitor through the vehicle's information display.
Common Issues / Tips
- Access: The spin-on oil filter (FL-910S for all engines) can be in a tight spot. A good quality filter wrench is recommended.
- Hybrid Models: To drain the oil on a hybrid, you may need to enter the service mode to force the gasoline engine to run. Consult your owner's manual for the specific procedure.
- Resetting the IOLM: Forgetting to reset the Intelligent Oil-Life Monitor is a common mistake. This is a critical step to ensure you get timely reminders for your next service.
- Use a Funnel: The oil fill cap is located on the top of the engine. Using a funnel will prevent messy spills on the engine cover and exhaust components.
Need an oil change? Find a trusted shop on Repairius.
More specs for the 2025 Ford Escape
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2025 Ford Escape Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.