2019 Ford F-150 Paint Codes

Quick reference

Where to find your paint code

Locating the paint code on your 2019 Ford F-150 is typically a straightforward process. The most common place to find this information is on the driver's side door jamb sticker. Open the driver's door and look for a sticker, usually white or silver, located on the pillar between the front and rear doors (the B-pillar). This sticker contains various vehicle information, including a section labeled "EXT PNT" or "Paint" followed by a two-digit alphanumeric code. This is your paint code.

In some cases, especially on older models or if the door jamb sticker is missing or illegible, you might also find the paint code in your owner's manual. Additionally, a Ford dealership parts department can quickly provide you with the exact paint code using your Vehicle Identification Number (VIN).

Best touch-up paint sources

When it comes to keeping your 2019 Ford F-150 looking its best, having the right touch-up paint is essential for addressing minor scratches and chips. Here are some of the most reliable sources:

• Dupli-Color: A widely available brand, Dupli-Color offers a variety of touch-up paint products, including paint pens, bottles with brushes, and aerosol cans. They provide a good range of Ford colors and are a great option for small chips and scratches.
• AutomotiveTouchup: This company specializes in custom-mixed automotive paints. They meticulously match your Ford F-150's factory color, offering paint in pens, bottles, cans, and even larger quantities for more extensive repairs. Their quality is often highly regarded for a precise color match.
• Tcoat custom-mix: Similar to AutomotiveTouchup, Tcoat provides custom-mixed paint solutions that are specifically formulated to match your vehicle's exact color. This can be particularly beneficial for pearl or metallic finishes where an exact match is crucial.
• Dealership: Your local Ford dealership can provide OEM (Original Equipment Manufacturer) touch-up paint. While sometimes a bit more expensive, this ensures the most accurate factory match, especially for newer or more complex paint finishes.

How to use touch-up paint

Proper application of touch-up paint is key to achieving a smooth, professional-looking repair. Follow these general steps:

1. Clean the area: Thoroughly clean the scratched or chipped area with soap and water, then dry completely. You can also use a wax and grease remover for optimal adhesion.
2. Apply primer (if needed): For deeper scratches that expose bare metal or plastic, apply a thin layer of automotive primer. Allow it to dry completely according to the product instructions.
3. Apply base coat: Shake the touch-up paint well. Apply thin, even coats of the base color, allowing each coat to dry for the recommended time before applying the next. Build up the paint slowly until it's level with the surrounding surface.
4. Apply clear coat: Once the base coat is dry, apply a clear coat. This protects the paint and provides a glossy finish. Again, apply in thin layers.
5. Buff (optional): After the clear coat has fully cured (this can take a few days), you can gently buff the area with a polishing compound to blend the repair seamlessly with the surrounding paint.

Color matching tips for pearls and tri-coats

Ford offers several pearl and tri-coat finishes on the 2019 F-150, such as Ruby Red Metallic Tinted Clearcoat, White Platinum Metallic Tri-Coat, and Star White Metallic Tri-Coat. These paints have multiple layers (a base color, a mid-coat containing pearl or metallic flakes, and a clear coat) to achieve their deep, shimmering effect.

• Expect a multi-stage repair: When touching up pearl or tri-coat colors, you'll typically need specific touch-up products that include separate base, pearl/mid-coat, and clear coat layers. Using only a single-stage touch-up paint will not achieve the correct depth or shimmer.
• Test first: Always test your touch-up paint on an inconspicuous area or a test card before applying it to your main repair. This is especially crucial for pearl and tri-coat colors to ensure the mid-coat effect is accurate.
• Apply thin, even layers: The key to replicating the factory finish with multi-stage paints is to apply very thin, even layers of each component. Too much of one layer can alter the final color and sparkle.
• Patience is key: These types of repairs require more patience and attention to detail. Allow ample drying time between each layer.

For any uncertainty regarding your specific paint code or complex repairs, always consult with a Ford dealership or a reputable automotive paint supplier. They can use your VIN to confirm the exact color formulation.

Find a trusted body shop on Repairius.