2017 Ford F-250 Super Duty Oil Capacity & Filter
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2017 Ford F-250 Super Duty? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
The 2017 Ford F-250 Super Duty takes 13 quarts (12.3 liters) of 10W-30 CK-4 oil for the 6.7L Power Stroke Diesel engine, and 7 quarts (6.6 liters) of 5W-30 WSS-M2C946-B1 oil for the 6.2L V8 gasoline engine.
Quick Answer
6.7L Power Stroke Diesel
- Oil Capacity: 13 quarts (12.3 liters)
- Recommended Oil Weight: 10W-30
- Oil Spec: CK-4
- OEM Oil Filter Part Number: FL-2124
- Aftermarket Oil Filter Cross-References:
- Fram: CH11665
- Wix: WL10010
- Mobil 1: M1C-153A
6.2L V8 Gasoline
- Oil Capacity: 7 quarts (6.6 liters)
- Recommended Oil Weight: 5W-30
- Oil Spec: WSS-M2C946-B1 (Ford specification, often covered by API SN Plus or SP for gasoline engines)
- OEM Oil Filter Part Number: FL-820S
- Aftermarket Oil Filter Cross-References:
- Fram: PH2
- Wix: 51372
- Mobil 1: M1-210
Capacity by Engine Option
| Engine | Oil Capacity (Quarts/Liters) | Recommended Oil Weight | Oil Specification |
|---|---|---|---|
| 6.7L Power Stroke Diesel | 13 quarts (12.3 liters) | 10W-30 | CK-4 |
| 6.2L V8 Gasoline | 7 quarts (6.6 liters) | 5W-30 | WSS-M2C946-B1 |
Oil Change Interval
Ford recommends the following oil change intervals for the 2017 F-250 Super Duty:
-
Normal Duty:
- 6.7L Power Stroke Diesel: Every 10,000 miles or 12 months, whichever comes first.
- 6.2L V8 Gasoline: Every 10,000 miles or 12 months, whichever comes first.
-
Severe Duty (e.g., extensive idling, frequent towing/hauling, extreme temperatures, dusty conditions, short trips):
- 6.7L Power Stroke Diesel: Every 5,000 miles or 6 months, whichever comes first.
- 6.2L V8 Gasoline: Every 5,000 miles or 6 months, whichever comes first.
Always refer to your owner's manual for the most accurate and up-to-date maintenance schedule. Ignoring severe duty recommendations can lead to premature engine wear.
Drain Plug Torque
- 6.7L Power Stroke Diesel: The drain plug torque for the 6.7L Power Stroke Diesel is 300 lb-in (25 lb-ft or 34 Nm). Always use a new crush washer or O-ring with each oil change to ensure a proper seal and prevent leaks. The 6.7L Power Stroke drain plug is often a cartridge-style drain valve that uses an O-ring.
- 6.2L V8 Gasoline: The drain plug torque for the 6.2L V8 gasoline engine is 19 lb-ft (25 Nm). A new crush washer is recommended with each oil change.
How to Change the Oil
Here's a general guide for changing the oil on a 2017 Ford F-250 Super Duty. Always follow proper safety procedures and consult your service manual.
- Gather Supplies: Ensure you have the correct oil, oil filter, drain pan, wrench (for drain plug and filter), torque wrench, and safety glasses.
- Warm the Engine: Drive the truck for a few minutes to warm the oil, allowing it to drain more easily.
- Lift and Secure: Safely lift the front of the vehicle using a jack and secure it with jack stands. Never work under a vehicle supported only by a jack.
- Locate Drain Plug: Place your drain pan beneath the oil pan drain plug.
- Drain Oil: Carefully remove the drain plug and allow all the old oil to drain completely. Replace the crush washer or O-ring.
- Replace Drain Plug: Reinstall the drain plug and torque it to the manufacturer's specifications.
- Remove Oil Filter: Locate the oil filter. Place the drain pan underneath it, as some oil will spill. Use an oil filter wrench to remove the old filter.
- Prepare New Filter: Apply a thin film of new oil to the gasket of the new oil filter.
- Install New Filter: Hand-tighten the new oil filter until the gasket makes contact, then tighten an additional 3/4 to 1 full turn. Do not overtighten.
- Add New Oil: Carefully pour the recommended amount and type of new oil into the engine's fill port.
- Check Level: Start the engine and let it run for a minute to circulate the oil. Turn off the engine, wait a few minutes, then check the oil level using the dipstick. Add more oil if necessary.
- Inspect for Leaks: Check for any leaks around the drain plug and oil filter.
- Dispose of Old Oil: Properly dispose of the used oil and filter at an authorized recycling center.
Common Issues / Tips
- 6.7L Power Stroke Diesel Fuel Filter Changes: While not oil, it's critical for diesel owners to regularly change both the primary and secondary fuel filters. This is often recommended every 15,000 miles or 12 months, but consult your manual. Neglecting these can lead to costly fuel system issues.
- 6.2L V8 Spark Plugs: For the gasoline engine, spark plug replacement is typically recommended around 100,000 miles. Using quality OEM or equivalent spark plugs is crucial for optimal performance.
- Regular Fluid Checks: Beyond oil, regularly check your power steering fluid, brake fluid, coolant, and transmission fluid. These checks can help identify potential issues early.
- Tire Pressure Monitoring: For heavy-duty trucks like the F-250, maintaining correct tire pressure is vital for safety, fuel economy, and tire longevity, especially when towing or hauling.
Need an oil change? Find a trusted shop on Repairius.
More specs for the 2017 Ford F-250 Super Duty
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
2014 F-250 Super Duty
2015 F-250 Super Duty
2016 F-250 Super Duty
2018 F-250 Super Duty
2019 F-250 Super Duty
2020 F-250 Super Duty
Maintenance & repair guides
2017 Ford F-250 Super Duty Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.