2017 Ford F-250 Super Duty Paint Codes

Quick reference

Where to find your paint code

For most 2017 Ford F-250 Super Duty trucks, you'll find the paint code on the door jamb sticker. This sticker is typically located on the B-pillar (the pillar between the front and rear doors) when the driver's door is open. Look for a label that contains various vehicle information, and the paint code will usually be listed under "EXT PNT" or "Exterior Paint". It will be a two-character code, corresponding to the codes in the table above.

Best touch-up paint sources

When it comes to touching up minor scratches or chips on your 2017 Ford F-250 Super Duty, several excellent options are available:

• Dupli-Color: A widely recognized brand, Dupli-Color offers aerosol cans and paint pens for many factory colors. They are a good choice for smaller repairs and are readily available at most auto parts stores.
• AutomotiveTouchup: This company specializes in custom-mixed touch-up paint that precisely matches your vehicle's factory color. They offer a wider range of application methods, including paint pens, brush bottles, and aerosol cans, and are known for their accurate color matching. This is an excellent choice for a more professional finish.
• Tcoat Custom-Mix: Some specialized paint suppliers like Tcoat can custom-mix paint based on your specific paint code, often providing a higher quality match, especially for more complex colors.
• Dealership: Your local Ford dealership can also supply touch-up paint, which will be the official factory color. While sometimes more expensive, it guarantees an exact match.

How to use touch-up paint

Achieving a good result with touch-up paint requires a few careful steps:

1. Clean the area: Thoroughly clean the chipped or scratched area with soap and water, then an automotive degreaser or rubbing alcohol. Ensure it's completely dry.
2. Apply primer (if needed): If the scratch goes down to the bare metal or plastic, apply a thin layer of primer. Allow it to dry completely according to the product instructions.
3. Apply base coat: Apply several thin layers of the base coat paint, allowing each layer to dry before applying the next. Build up the color gradually until it matches the surrounding paint. For metallic and pearl colors, shake the paint frequently to ensure even distribution of the metallic flakes or pearl particles.
4. Apply clear coat: Once the base coat is dry, apply one or two thin layers of clear coat to protect the paint and provide a glossy finish. This is crucial for durability and matching the factory sheen.

Color matching tips for pearls and tri-coats

Many of the colors offered on the 2017 Ford F-250 Super Duty, such as Ruby Red and White Gold, are metallic, and some may even have a pearl or tri-coat finish (a three-stage paint process involving a base coat, a mid-coat containing pearl or metallic flakes, and a clear coat). These types of paints can be more challenging to match perfectly due to the way light reflects off the metallic flakes or pearl particles.

• Application consistency: For metallic and pearl paints, consistent application is key. Avoid applying too much paint at once, as this can lead to an uneven distribution of flakes and an inconsistent appearance.
• Blending: For larger repairs, professional shops often "blend" the paint into the surrounding panel to achieve a seamless transition. While difficult for DIY touch-ups, being aware of this technique can help manage expectations.
• Lighting: Always check your touch-up work in various lighting conditions (natural daylight, shade) to ensure the color match is satisfactory.

If you're uncertain about a specific color code or have a pearl or tri-coat finish, it's always best to verify the correct paint code using your VIN at your Ford dealership or a reputable paint supplier. This ensures you get the most accurate match for your truck.

Find a trusted body shop on Repairius.