Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Torque Specifications

    2019 Ford F-250 Super Duty Torque Specifications

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2019 Ford F-250 Super Duty? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Reference

    FastenerTorque (ft-lb / Nm)Notes
    Wheel Lug Nuts165 ft-lb / 224 Nm
    Oil Drain Plug18 ft-lb / 25 Nm
    Transmission Drain Plug10 ft-lb / 14 Nm
    Front Brake Caliper Bracket Bolts184 ft-lb / 250 Nm
    Rear Brake Caliper Bracket Bolts130-148 ft-lb / 176-200 Nm
    Front Brake Caliper Slide Pins52 ft-lb / 70 Nm
    Rear Brake Caliper Slide Pins25-35 ft-lb / 34-47 Nm
    Front Axle Nut250-300 ft-lb / 339-407 Nm
    Rear Axle Nut103-121 ft-lb / 140-164 Nm
    Spark Plugs (6.2L V8)11 ft-lb / 15 Nm
    Intake Manifold Bolts (6.2L V8)89 in-lb / 10 NmNote: inch-pounds
    Valve Cover Bolts89 in-lb / 10 NmNote: inch-pounds

    Wheel Lug Torque Pattern

    For the 2019 F-250 Super Duty with its 8-lug wheels, the correct lug nut torque pattern is a star or cross pattern. This ensures the wheel is seated evenly against the hub, preventing vibration and ensuring safety. Start with one lug nut, then tighten the one directly across from it. Move to the next lug nut and tighten the one across from it, continuing until all lug nuts are tightened to the specified torque. Never tighten lug nuts in a circular pattern.

    Brake Torque Notes

    Brake system fasteners are critical to your safety. The torque values for brake components, especially caliper bracket bolts, are quite high on the F-250 Super Duty. This is due to the immense forces these components must withstand to stop a heavy truck. Always use a calibrated torque wrench for these fasteners. It's also a good practice to use a thread-locking compound on caliper bracket bolts for added security.

    Why Torque Matters

    Torque is the rotational equivalent of force, and every fastener on your F-250 Super Duty has a specific torque value for a reason. Over-tightening a fastener can stretch the threads, damaging the bolt and the component it's threaded into. Under-tightening can lead to a loose component, which can be catastrophic, especially with critical parts like wheels and brakes. Using a torque wrench removes the guesswork and ensures a safe and reliable repair.

    Disclaimer: The torque specifications provided here are for reference only. Critical fasteners should always be verified in the OEM service manual for your specific vehicle configuration.

    Find a trusted shop on Repairius.

    Need service on your Ford F-250 Super Duty?

    Request service from shops in your area.

    More specs for the 2019 Ford F-250 Super Duty

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Driving or Managing a Fleet?

    Use Dispatchtool for truck navigation, driver communication, dispatching, and fleet management.

    Visit Dispatchtool
    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email