2019 Ford F-250 Super Duty Paint Codes

Quick Reference

Where to find your paint code

For most 2019 Ford F-250 Super Duty trucks, your paint code can be found on a sticker located on the driver's side door jamb. Open the driver's door and look for a label similar to the one shown below. The paint code is usually listed next to "EXT PNT" or "Exterior Paint." It will be a two-character code, which may also include a color name. In some cases, especially for some two-tone models, there might be two codes listed. If you have trouble locating it, your owner's manual will have a diagram, or you can check with a Ford dealership parts department using your VIN.

Best touch-up paint sources

When it comes to touching up minor scratches or chips on your 2019 Ford F-250 Super Duty, several reputable brands offer color-matched paint. Be sure to verify the paint code with your vehicle's sticker or VIN to ensure a perfect match.

• Dupli-Color: A widely available brand that offers touch-up paint in pens, bottles, and spray cans. They are a good option for small chips and scratches and can be found at most automotive parts stores.
• AutomotiveTouchup: This company specializes in custom-mixed aerosol cans, paint pens, and brush bottles that are matched to your vehicle's exact paint code. They are known for providing high-quality, factory-matched colors, including pearls and metallics.
• Tcoat Custom-Mix: For those seeking the most precise match, especially for complex colors, Tcoat offers custom-mixed paints. You provide them with your paint code, and they blend the paint to order, often resulting in a superior color match compared to off-the-shelf options.
• Dealership: Your local Ford dealership parts department can also supply official Ford touch-up paint. While potentially more expensive, these are guaranteed to be exact factory matches.

How to use touch-up paint

Using touch-up paint effectively can significantly improve the appearance of minor imperfections. Follow these general steps for best results:

1. Clean the Area: Thoroughly wash and dry the area to be repaired. Use a degreaser or rubbing alcohol to ensure it's free of wax, grease, and dirt.
2. Apply Primer (if needed): For deeper scratches that expose bare metal or plastic, a thin coat of primer is recommended. Allow it to dry completely according to the product instructions.
3. Apply Base Coat: Apply the color-matched base coat in thin layers. Allow each layer to dry before applying the next. Build up the paint gradually until it's level with the surrounding surface. For paint pens, dab the paint into the scratch; for bottles, use the included brush to carefully fill the defect.
4. Apply Clear Coat: Once the base coat is dry, apply a clear coat to protect the paint and restore the shine. Again, apply in thin layers, allowing adequate drying time between coats.
5. Cure and Polish: Allow the clear coat to cure completely (this can take several days). Once cured, you can gently wet sand with very fine-grit sandpaper (2000-3000 grit) if necessary, followed by polishing compound to blend the repair seamlessly.

Color matching tips for pearls and tri-coats

Many of the 2019 Ford F-250 Super Duty colors are metallic or pearl, and one is even a tri-coat (Star White Metallic). These types of paints have unique properties that make color matching a bit more challenging:

• Metallic Paints: These contain small metallic flakes that reflect light, creating a sparkle effect. The direction and evenness of paint application can affect how the metallic flakes lay, influencing the final appearance. Apply in even, steady strokes.
• Pearl (or Mica) Paints: Similar to metallics, pearl paints contain mica particles that produce a subtle, iridescent shimmer. These often have a deeper, more luxurious look. Like metallics, application technique is crucial.
• Tri-Coat Paints: These are the most complex, consisting of three distinct layers: a colored base coat, a translucent mid-coat (the "pearl" or "effect" coat), and a clear coat. Star White Metallic (AZ) is an example of a tri-coat. When touching up tri-coats, it's essential to apply each layer correctly and sparingly. Too much or too little of the mid-coat can significantly alter the final color. It's often recommended to test tri-coat touch-up paints on a hidden area or a test card first to get a feel for the application.

For metallic and pearl finishes, always shake the touch-up paint thoroughly to ensure the flakes are evenly dispersed. When applying, try to mimic the original spray pattern as much as possible to achieve the best metallic or pearl effect.

Find a trusted body shop on Repairius.