2022 Ford F-350 Super Duty Oil Capacity & Filter

The 2022 Ford F-350 Super Duty takes 6.7 to 7.3 quarts of engine oil, depending on the engine. For optimal performance and longevity of your robust workhorse, using the correct oil capacity, weight, and specification is crucial.

Quick Answer

6.7L Power Stroke V8 Diesel

• Capacity: 15 US Quarts (14.2 Liters)
• Recommended Oil Weight: SAE 10W-30
• Oil Spec: WSS-M2C171-F1
• Oil Filter (OEM): FL-2124
  • Fram Cross-Reference: CH12670
  • Wix Cross-Reference: WL10010
  • Mobil 1 Cross-Reference: M1C-153

7.3L Godzilla V8 Gasoline

• Capacity: 7.3 US Quarts (6.9 Liters)
• Recommended Oil Weight: SAE 5W-30
• Oil Spec: WSS-M2C946-B1 (Synthetic Blend Recommended)
• Oil Filter (OEM): FL-910S
  • Fram Cross-Reference: PH2
  • Wix Cross-Reference: 51372
  • Mobil 1 Cross-Reference: M1-210

Capacity by Engine Option

Oil Change Interval

Ford recommends the following oil change intervals for the 2022 F-350 Super Duty:

• Normal Duty: Every 7,500 to 10,000 miles or 12 months, whichever comes first.
• Severe Duty: Every 5,000 miles or 6 months, whichever comes first. Severe duty conditions include frequent towing/hauling, extensive idling, dusty environments, or extreme temperatures.

Drain Plug Torque

• 6.7L Power Stroke V8 Diesel: 21 ft-lbs (28 Nm)
• 7.3L Godzilla V8 Gasoline: 19 ft-lbs (25 Nm)

Always use a new crush washer with the drain plug to ensure a proper seal and prevent leaks. The crush washer is designed to deform and create a tight seal once torqued.

How to Change the Oil

1. Warm up the engine: Drive the truck for a few minutes to bring the oil to operating temperature, making it flow more easily.
2. Park on a level surface: Engage the parking brake and use wheel chocks for safety.
3. Locate drain plug: Place an oil drain pan underneath the drain plug.
4. Remove drain plug: Carefully loosen and remove the drain plug, allowing the old oil to drain completely. Be cautious as the oil may be hot.
5. Replace drain plug: Once drained, reinstall the drain plug with a new crush washer and torque to the specified value.
6. Remove old filter: Locate the oil filter and use an oil filter wrench to remove it. Be prepared for some residual oil to spill.
7. Install new filter: Apply a thin film of clean oil to the new filter