Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Oil Capacity & Filter

    2023 Ford Ranger Oil Capacity & Filter Guide

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2023 Ford Ranger? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    The 2023 Ford Ranger with the 2.3L EcoBoost I-4 engine requires 6.2 quarts (5.9 liters) of 5W-30 synthetic blend oil.

    Quick Answer

    • Oil Capacity: 6.2 qts / 5.9 L
    • Recommended Oil Weight: SAE 5W-30
    • Oil Specification: API SP / Ford WSS-M2C961-A1
    • Oil Filter (OEM): Ford FL-910S
    • Oil Filter (Aftermarket):
      • Fram PH3614
      • Wix 51348
      • Mobil 1 M1-102A

    Capacity by Engine Option

    For the 2023 model year in North America, the Ford Ranger was offered with a single engine option.

    EngineOil Capacity (with filter)Recommended Oil ViscosityOil Specification
    2.3L EcoBoost I-46.2 quarts (5.9 liters)SAE 5W-30Ford WSS-M2C961-A1

    Oil Change Interval

    Ford recommends using its Intelligent Oil-Life Monitor® (IOLM) system to determine when to change your oil. The system will display a message in the instrument cluster when it's time for service. However, if you are not using the IOLM, follow these general guidelines:

    • Normal Duty: Change the oil and filter every 7,500 to 10,000 miles.
    • Severe Duty: Change the oil and filter every 3,000 to 5,000 miles. Severe duty includes frequent towing, extensive idling, driving in dusty conditions, or making many short trips.

    Drain Plug Torque

    • Drain Plug Torque: 21 lb-ft (28 Nm)
    • Crush Washer: It is always recommended to replace the drain plug crush washer, if equipped, with every oil change to prevent leaks. Consult your dealer for the specific part number.

    How to Change the Oil

    1. Run the engine for a few minutes to warm the oil.
    2. Safely raise and support the vehicle.
    3. Place a drain pan under the oil pan and remove the drain plug.
    4. Allow the oil to drain completely.
    5. Remove the old oil filter. Be prepared for some oil to spill.
    6. Clean the filter mating surface on the engine.
    7. Apply a thin layer of new oil to the gasket of the new oil filter.
    8. Install the new filter and tighten it hand-tight, plus an additional quarter turn.
    9. Reinstall the drain plug with a new crush washer and torque it to 21 lb-ft.
    10. Fill the engine with 6.2 quarts of 5W-30 oil.
    11. Start the engine, check for leaks, and then shut it off.
    12. After a few minutes, re-check the oil level with the dipstick and top off if necessary.
    13. Reset the oil life monitor.

    Common Issues / Tips

    • Cartridge vs. Spin-on Filter: The 2.3L EcoBoost has a spin-on oil filter, which is easier to access and replace than the cartridge filters found on some other Ford engines.
    • Access: The oil filter and drain plug are generally easy to access from underneath the truck, though removing the factory skid plate (if equipped) may be necessary.
    • Oil Life Monitor Reset: Don't forget to reset the IOLM after your oil change. This can typically be done through the vehicle settings menu in the instrument cluster display.

    Need an oil change? Find a trusted shop on Repairius.

    Need service on your Ford Ranger?

    Request service from shops in your area.

    More specs for the 2023 Ford Ranger

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email