2022 Ford Transit Oil Capacity & Filter Specs

The 2022 Ford Transit will take between 7.2 and 10.9 quarts of 5W-30 synthetic engine oil, depending on the engine. This guide provides detailed oil capacities, specifications, and maintenance tips for your 2022 Ford Transit.

Quick Answer

Here's a quick reference for the 2022 Ford Transit's oil specifications:

• Oil Capacity:
  • 2.0L EcoBlue Diesel: 7.2 quarts (6.8 liters)
  • 3.5L EcoBoost V6: 6.0 quarts (5.7 liters)
  • 3.5L PFDi V6: 6.0 quarts (5.7 liters)
• Recommended Oil Weight: 5W-30
• Oil Type Specification: WSS-M2C946-B1 (for gasoline engines), WSS-M2C952-A1 for 2.0L EcoBlue Diesel. Look for API SP or SN PLUS for gasoline, and ACEA C2 for diesel.
• Oil Filter Part Numbers:
  • 2.0L EcoBlue Diesel:
    • OEM: Motorcraft FL-2070 / FT4Z-6731-D
    • Fram: CH12918
    • Wix: WL10059
    • Mobil 1: M1C-153A
  • 3.5L EcoBoost V6 & 3.5L PFDi V6:
    • OEM: Motorcraft FL-910S / AA5Z-6714-A
    • Fram: PH3614
    • Wix: 51372
    • Mobil 1: M1-102A

Capacity by Engine Option

Oil Change Interval

Ford recommends the following oil change intervals for the 2022 Transit:

• Normal Duty: Typically every 7,500 to 10,000 miles or 12 months, whichever comes first.
• Severe Duty: If you frequently tow, idle for extended periods, drive in extreme temperatures, or operate in dusty conditions, it is recommended to change your oil every 5,000 miles or 6 months.

Always consult your owner's manual for the most accurate and up-to-date information specific to your vehicle.

Drain Plug Torque

• Drain Plug Torque: 19 ft-lbs (25 Nm) – For both gasoline and diesel engines. Always use a torque wrench to ensure proper sealing without overtightening.
• Crush Washer: It is highly recommended to replace the crush washer (gasket) on the drain plug every time you perform an oil change. This helps ensure a leak-free seal.

How to Change the Oil

Performing an oil change on your 2022 Ford Transit is a straightforward process. Here's a general overview:

1. Warm Up Engine: Run the engine for a few minutes to bring the oil to operating temperature, making it flow more easily.
2. Locate Drain Plug: Park on a level surface, engage the parking brake, and safely lift the front of the vehicle. Place a drain pan underneath the oil pan.
3. Drain Oil: Carefully remove the drain plug and allow all the old oil to drain completely. Inspect the drain plug and replace the crush washer.
4. Replace Filter: Locate and remove the old oil filter. Apply a thin coat of new oil to the gasket of the new filter before threading it on by hand until snug. Do not overtighten.
5. Refill Oil: Reinstall the drain plug and lower the vehicle. Remove the oil cap and carefully pour in the recommended amount of fresh oil.
6. Check Level: Start the engine and let it run for a minute to circulate the new oil. Turn off the engine, wait a few minutes, and then check the oil level with the dipstick. Top off if necessary.
7. Reset Oil Life Monitor: Follow the instructions in your owner's manual to reset the oil life monitoring system.

Common Issues / Tips

• Diesel Particulate Filter (DPF) Maintenance (2.0L EcoBlue Diesel): For diesel models, using the correct low-ASH oil (WSS-M2C952-A1) is crucial for the longevity of the DPF system. Incorrect oil can lead to premature DPF clogging.
• EcoBoost Engine Oil Dilution: Some EcoBoost engines can experience oil dilution from fuel. Regular oil changes with the correct specification oil are vital to mitigate potential long-term effects.
• Check for Leaks: After an oil change, always double-check for any oil leaks around the drain plug and oil filter.
• Use Quality Filters: While aftermarket filters are listed, high-quality filters like Motorcraft, Wix, and Mobil 1 are recommended for optimal engine protection.

Need an oil change? Find a trusted shop on Repairius.