2025 GMC Yukon Torque Specifications
Essential Fastener Torque Specifications for Your 2025 GMC Yukon
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2025 GMC Yukon? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 140 ft-lb (190 Nm) | For all wheel types |
| Oil Drain Plug | 18-25 ft-lb (24-34 Nm) | Ranges may vary by engine |
| Transmission Drain Plug | 15-22 ft-lb (20-30 Nm) | Varies by transmission model |
| Front Brake Caliper Bracket Bolts | 129 ft-lb (175 Nm) | |
| Rear Brake Caliper Bracket Bolts | 129 ft-lb (175 Nm) | |
| Brake Caliper Slide Pins | 28-35 ft-lb (38-47 Nm) | Ensure proper lubrication |
| Axle Nut (Front) | 177 ft-lb (240 Nm) | After installation, may require further tightening or a new nut per OEM procedure |
| Axle Nut (Rear) | 177 ft-lb (240 Nm) | After installation, may require further tightening or a new nut per OEM procedure |
| Spark Plugs | 11-15 ft-lb (15-20 Nm) | For gasoline engines; use anti-seize sparingly if recommended by plug manufacturer |
| Valve Cover Bolts | 89-106 in-lb (10-12 Nm) | Typically, a two-stage tightening process in a specific sequence |
| Intake Manifold Bolts | 89-106 in-lb (10-12 Nm) | Follow multi-stage tightening sequence |
Wheel lug torque pattern
The 2025 GMC Yukon typically utilizes a star or cross pattern for tightening wheel lug nuts. This method ensures even pressure distribution across the wheel hub, preventing warping of the rotor or wheel and ensuring proper seating. Begin by hand-tightening all lug nuts, then progressively tighten them to the final specified torque in the recommended pattern. For a 6-lug wheel, a star pattern is common, moving across the hub to opposing lugs. For 5-lug wheels, a star or cross pattern is also typical.
Brake torque notes
When working on the braking system of your 2025 GMC Yukon, precise torque application is paramount for safety and performance. Caliper bracket bolts, in particular, are critical fasteners that experience significant forces during braking. Incorrect torque can lead to loose components, uneven pad wear, or even catastrophic failure. Always clean the threads of both the bolts and the mounting points before reassembly. For caliper slide pins, proper lubrication with a high-temperature, silicone-based grease is just as important as the correct torque. This allows the caliper to float freely, ensuring even pad wear and optimal braking performance. Never over-tighten these components, as it can damage threads or distort parts, compromising the braking system's integrity.
Why torque matters
Applying the correct torque to fasteners is not just a suggestion; it's a fundamental aspect of vehicle maintenance and repair that directly impacts safety, reliability, and longevity. Under-torquing a fastener can lead to it loosening over time due to vibration and stress, potentially causing components to separate or fail. This is especially dangerous in critical areas like wheels, brakes, and suspension. Conversely, over-torquing a fastener can be equally damaging. It can stretch or strip threads, deform components, or even cause bolts to break. This weakens the joint and can lead to premature failure. Furthermore, consistent and accurate torque ensures that components are held together with the intended clamping force, allowing them to function as designed. For example, properly torqued spark plugs ensure good electrical contact and heat transfer, while correctly torqued valve cover bolts prevent oil leaks.
Disclaimer: Always consult the official 2025 GMC Yukon factory service manual for the most accurate and up-to-date torque specifications and procedures. This information is intended for general guidance only and should not replace professional advice or the use of OEM resources for critical automotive repairs.
Find a trusted shop on Repairius.
More specs for the 2025 GMC Yukon
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2025 GMC Yukon Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.