2017 Honda Odyssey Oil Capacity & Filter Specs

The 2017 Honda Odyssey takes 4.5 quarts (4.3 Liters) of 0W-20 synthetic motor oil.

Quick Answer

• Oil Capacity: 4.5 US Quarts (4.3 Liters) with filter change
• Recommended Oil Weight: 0W-20
• Oil Type Spec: Full Synthetic, API AFE (Advanced Fuel Economy) or Honda HTO-06 equivalent (consult owner's manual for specific certifications)
• Oil Filter:
  • OEM: Honda P/N 15400-RTA-003, 15400-RTA-004, or 15400-PLM-A01/A02 (check with dealer based on VIN)
  • Fram: PH7317
  • Wix: 51356
  • Mobil 1: M1-110

Capacity by Engine Option

For the 2017 Honda Odyssey, there is only one engine option available:

Oil Change Interval

Honda's Maintenance Minder System will typically indicate when an oil change is due, but general guidelines are as follows:

• Normal Duty: 7,500 - 10,000 miles or 12 months, whichever comes first.
• Severe Duty: 3,000 - 5,000 miles or 6 months, whichever comes first. Severe duty includes frequent short trips, extreme temperatures, heavy towing, or extensive idling.

Drain Plug Torque

The oil drain plug on the 2017 Honda Odyssey should be torqued to 29 lb-ft (39 Nm). Always replace the crush washer with a new one to ensure a proper seal and prevent leaks. The OEM crush washer part number is typically 94109-14000.

How to Change the Oil

1. Gather your supplies: new oil, new oil filter, new crush washer, drain pan, wrench for drain plug, oil filter wrench, and rags.
2. Warm up the engine slightly, then shut it off. This helps the oil drain more easily.
3. Locate the drain plug on the oil pan underneath the vehicle. Place the drain pan below it.
4. Using the correct wrench, carefully remove the drain plug. Allow all the old oil to drain completely.
5. Once the oil has drained, replace the crush washer on the drain plug and reinsert it. Torque to 29 lb-ft.
6. Locate the oil filter. Place the drain pan underneath it, as some oil will spill.
7. Remove the old oil filter using an oil filter wrench.
8. Apply a thin coat of new oil to the rubber gasket of the new oil filter. Screw on the new filter by hand until snug, then turn an additional 3/4 to 1 full turn.
9. Refill the engine with 4.5 quarts of new 0W-20 oil through the oil fill cap on top of the engine.
10. Replace the oil fill cap, start the engine, and let it run for a few minutes. Check for any leaks around the drain plug and oil filter.
11. Shut off the engine, wait a few minutes for the oil to settle, then check the oil level with the dipstick. Add more oil if necessary.
12. Reset the Maintenance Minder system.

Common Issues / Tips

• VCM (Variable Cylinder Management): The 3.5L V6 engine in the 2017 Odyssey utilizes Honda's Variable Cylinder Management. Some owners report increased oil consumption associated with VCM, particularly on earlier models. Regularly check your oil level between changes, especially if you notice a decrease in performance or an illuminated low oil light. Using the correct viscosity and full synthetic oil is crucial.
• Oil Filter Location: The oil filter on this generation Odyssey is easily accessible from underneath the vehicle, making oil changes relatively straightforward.
• Crush Washer: Do not reuse the old crush washer on the drain plug. A new one is inexpensive and vital for preventing oil leaks.
• Maintenance Minder: Pay attention to the Maintenance Minder system for optimal service intervals. It takes into account driving conditions to determine when maintenance is needed.
• Genuine Honda Parts: While quality aftermarket filters are available, many enthusiasts and technicians prefer genuine Honda oil filters for their proven performance and fitment.

Need an oil change? Find a trusted shop on Repairius.