2019 Honda Pilot Oil Capacity & Filter
Complete guide to oil capacity, viscosity, type, and filter for your 2019 Pilot
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2019 Honda Pilot? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
The 2019 Honda Pilot takes 5.7 quarts (5.4 liters) of 0W-20 engine oil, meeting API SP, SN PLUS, or SN standards, and/or ILSAC GF-6 or GF-5. This capacity applies to all engine options.
Quick answer
- Oil Capacity: 5.7 quarts (5.4 liters)
- Recommended Oil Weight: 0W-20
- Oil Spec: API SP, SN PLUS, or SN and/or ILSAC GF-6 or GF-5 (Full synthetic recommended)
- OEM Oil Filter Part Number: 15400-PLM-A02 or 15400-RTA-003 (Always verify with your Honda dealer using your VIN)
- Aftermarket Oil Filter Cross-References:
- Fram: PH7317
- Mobil 1: M1-110
- Wix: 57356
Capacity by engine option
The 2019 Honda Pilot is equipped with a single engine option across all trims:
| Engine | Oil Capacity (Quarts/Liters) |
|---|---|
| 3.5L V6 (J35Y6) | 5.7 quarts (5.4 liters) |
Oil change interval
Honda's onboard Maintenance Minder system is your primary guide for oil change intervals. This system continuously monitors driving conditions and engine operation to determine the optimal time for service.
- Normal Duty: Typically, the Maintenance Minder will indicate an oil change is due between 7,500 and 10,000 miles (12,000 to 16,000 km) or every 12 months, whichever comes first.
- Severe Duty: If you frequently drive in demanding conditions such as extreme temperatures, heavy stop-and-go traffic, towing, or dusty environments, the Maintenance Minder may recommend an oil change as early as 3,000 to 5,000 miles (4,800 to 8,000 km). Always heed the Maintenance Minder's warning lights.
Drain plug torque
- Drain Plug Torque: 29 lb-ft (39 Nm)
- Crush Washer: Always replace the aluminum crush washer on the drain plug at each oil change to ensure a proper seal and prevent leaks. Honda part number for the crush washer is typically 94109-14000, but confirm with your dealer.
How to change the oil
- Warm up the engine slightly, then safely lift and support the front of the vehicle. Ensure it is level for accurate draining.
- Locate the oil drain plug on the oil pan and place a suitable drain pan underneath.
- Remove the drain plug, allowing the old oil to drain completely. Inspect the old crush washer.
- Once drained, install a new crush washer on the drain plug and reinsert it, tightening to 29 lb-ft (39 Nm).
- Locate the oil filter, usually accessible from underneath. Be prepared for some oil spillage.
- Carefully unscrew the old oil filter. Ensure the old rubber gasket comes off with the filter; if not, remove it from the engine block.
- Apply a thin film of new engine oil to the rubber gasket of the new filter.
- Screw on the new oil filter by hand until it's snug, then tighten an additional 3/4 to 1 full turn (or follow filter manufacturer's instructions).
- Lower the vehicle safely.
- Remove the oil filler cap on top of the engine and add approximately 5.5 quarts of the recommended 0W-20 oil.
- Replace the oil filler cap, start the engine, and let it run for a minute or two to circulate the new oil. Check for any leaks around the drain plug and filter.
- Turn off the engine, wait a few minutes for the oil to settle, then check the oil level on the dipstick. Add small amounts of oil as needed until the level is within the safe range.
- Reset the Maintenance Minder system according to your owner's manual instructions.
Common issues / tips
- VCM (Variable Cylinder Management): The 2019 Honda Pilot utilizes Honda's VCM system, which can sometimes lead to increased oil consumption in certain circumstances. Regularly check your oil level between changes, especially if you notice a decrease.
- Oil Life Monitor (Maintenance Minder): Don't just rely on mileage. The Maintenance Minder system is designed to optimize oil change intervals based on your driving habits. Always follow its recommendations.
- Use Quality Oil: Given the precise tolerances and technologies in modern engines like the Pilot's J35Y6, using a high-quality full synthetic 0W-20 oil that meets the specified API and ILSAC standards is crucial for longevity and performance.
- Filter Placement: The oil filter on the 3.5L V6 is relatively easy to access from underneath, making DIY oil changes manageable.
Need an oil change? Find a trusted shop on Repairius.
More specs for the 2019 Honda Pilot
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2019 Honda Pilot Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.