Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Torque Specifications

    2019 Honda Pilot Torque Specifications

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2019 Honda Pilot? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Reference

    FastenerTorque (ft-lb / Nm)Notes
    Wheel Lug Nuts94 ft-lb / 127 Nm
    Oil Drain Plug30 ft-lb / 41 Nm
    Transmission Drain Plug36 ft-lb / 49 Nm
    Front Brake Caliper Bracket Bolts112 ft-lb / 152 Nm
    Rear Brake Caliper Bracket Bolts79 ft-lb / 107 Nm
    Front Brake Caliper Slide Pins24 ft-lb / 33 Nm
    Rear Brake Caliper Slide Pins17 ft-lb / 23 Nm
    Axle Nut242 ft-lb / 328 NmStake nut after torquing
    Spark Plugs16 ft-lb / 22 Nm
    Valve Cover Bolts8.7 ft-lb / 12 Nm
    Intake Manifold Bolts16 ft-lb / 22 NmTighten in sequence

    Wheel Lug Torque Pattern

    When tightening the wheel lug nuts on your 2019 Honda Pilot, it is crucial to use a star or cross pattern. This ensures even clamping force, which helps prevent rotor runout and ensures the wheel is properly seated on the hub. Never tighten lug nuts in a circular pattern.

    Brake Torque Notes

    Brake system fasteners are some of the most critical on any vehicle. The torque values for brake caliper bracket bolts are significantly higher than those for the caliper slide pins. This is because the bracket is a structural component, while the slide pins simply guide the caliper. Always use a calibrated torque wrench for these fasteners. We recommend applying a thin coat of high-temperature brake grease to the slide pins to ensure smooth caliper operation.

    Why Torque Matters

    Torque is a measure of rotational force. Applying the correct torque to a fastener ensures that it is tight enough to not loosen under vibration and load, but not so tight that it stretches or breaks the fastener, or damages the components it is holding together. Over-torquing can be just as dangerous as under-torquing. For example, over-tightened wheel lug nuts can warp brake rotors, leading to a pulsation in the brake pedal. An under-tightened axle nut, on the other hand, could lead to a catastrophic wheel bearing failure.

    Disclaimer: The torque specifications listed above are for reference only. Critical fasteners should always be verified in the OEM service manual for your specific vehicle. Torque specifications can vary based on submodel and other factors.

    Find a trusted shop on Repairius.

    Need service on your Honda Pilot?

    Request service from shops in your area.

    More specs for the 2019 Honda Pilot

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email