Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Torque Specifications

    2021 Honda Pilot Torque Specifications

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2021 Honda Pilot? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Reference

    FastenerTorque (ft-lb / Nm)Notes
    Wheel Lug Nuts94 ft-lb / 127 Nm
    Oil Drain Plug30 ft-lb / 41 Nm
    Transmission Drain Plug36 ft-lb / 49 Nm
    Front Brake Caliper Bracket Bolts100 ft-lb / 136 Nm
    Front Brake Caliper Slide Pins24 ft-lb / 33 Nm
    Rear Brake Caliper Bracket Bolts66 ft-lb / 89 Nm
    Rear Brake Caliper Slide Pins24 ft-lb / 33 Nm
    Axle Nut243 ft-lb / 329 Nm
    Spark Plugs13 ft-lb / 18 Nm
    Valve Cover Bolts8.7 ft-lb / 12 Nm
    Intake Manifold Bolts16 ft-lb / 22 Nm

    Wheel Lug Torque Pattern

    When tightening the wheel lug nuts on your 2021 Honda Pilot, it is crucial to follow a star or cross pattern. This ensures that the wheel is seated evenly against the hub, preventing vibration and ensuring safety. Start with one lug nut, then tighten the one directly across from it. Continue this pattern until all lug nuts are tightened to the specified torque.

    Brake Torque Notes

    Properly torquing brake components is critical for safety. The brake caliper bracket bolts are a high-torque fastener and should be cleaned and inspected before reinstallation. The brake caliper slide pins should be lubricated with a high-temperature silicone-based grease to ensure smooth operation.

    Why Torque Matters

    Using a calibrated torque wrench to tighten fasteners to their specified torque is essential for several reasons. Over-tightening can stretch and weaken the fastener, leading to failure. Under-tightening can allow the fastener to loosen over time, which can have catastrophic consequences, especially with critical components like wheels and brakes. Always use a torque wrench for the most accurate and safe results.

    Disclaimer: The information on this page is for reference only. Critical fasteners should always be verified in the OEM service manual before beginning any work. Repairius is not responsible for any damage or injury that may result from the use of this information.

    Find a trusted shop on Repairius.

    Need service on your Honda Pilot?

    Request service from shops in your area.

    More specs for the 2021 Honda Pilot

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email