Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Torque Specifications

    2017 Honda Pilot Torque Specifications

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2017 Honda Pilot? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick reference

    FastenerTorque (ft-lb / Nm)Notes
    Wheel Lug Nuts94-96 ft-lb / 127-130 NmConsult owner's manual for specific wheel types
    Oil Drain Plug29-33 ft-lb / 39-44 NmReplace crush washer with each oil change
    Transmission Drain Plug35-36 ft-lb / 47-49 NmAlways use a new drain plug washer
    Front Brake Caliper Bracket Bolts80-87 ft-lb / 108-118 NmApply thread locker if specified by OEM
    Rear Brake Caliper Bracket Bolts41-47 ft-lb / 55-63 NmApply thread locker if specified by OEM
    Front Brake Caliper Slide Pins16-20 ft-lb / 22-27 NmLubricate pins with appropriate grease
    Rear Brake Caliper Slide Pins16-20 ft-lb / 22-27 NmLubricate pins with appropriate grease
    Front Axle Nut181-185 ft-lb / 245-250 NmStake or use new nut as specified by OEM
    Spark Plugs13-14 ft-lb / 18-19 NmUse anti-seize sparingly, if at all, as per spark plug manufacturer
    Valve Cover Bolts7.2-8.7 ft-lb / 10-12 NmTighten in sequence as specified by OEM
    Intake Manifold Bolts16 ft-lb / 22 NmTighten in sequence as specified by OEM

    Wheel lug torque pattern

    For the 2017 Honda Pilot, the recommended wheel lug nut tightening pattern is typically a star pattern (also known as a cross pattern). This ensures that the wheel is seated evenly against the hub, preventing warping of the rotor or wheel. Start by hand-tightening all lug nuts, then tighten in the star pattern in several stages until the final torque specification is reached.

    Brake torque notes

    Proper torque is crucial for all brake components to ensure safe and reliable operation. When working on the brake system of your 2017 Honda Pilot:

    • Caliper Bracket Bolts: These bolts are subject to high stress and are critical for holding the caliper securely. Always use the specified torque and, if recommended by Honda, apply a medium strength thread locker to prevent loosening.
    • Caliper Slide Pins: These pins allow the caliper to float freely and are essential for even brake pad wear. Ensure they are clean and properly lubricated with high-temperature silicone grease before reinstalling. Over-tightening can bind the pins, leading to uneven pad wear and braking performance issues. Under-tightening can lead to excessive movement and noise.
    • Axle Nuts: The axle nut secures the axle shaft to the hub. Proper torque is vital for bearing life and overall wheel assembly integrity. Always replace the cotter pin or stake the new nut as specified by Honda to prevent it from backing off.

    Why torque matters

    Torque specifications are not arbitrary numbers; they are precisely engineered values that ensure fasteners are tightened to the correct tension. This tension is critical for several reasons:

    • Prevents Loosening: Under-torqued fasteners can vibrate loose, leading to catastrophic failure of components such as wheels or brake calipers.
    • Prevents Damage: Over-torqued fasteners can strip threads, stretch bolts, or crack components, requiring costly repairs.
    • Ensures Proper Function: Many components, like valve covers, rely on specific clamp loads to create seals and prevent leaks. Spark plugs require proper torque to dissipate heat efficiently.
    • Maintains Structural Integrity: In areas like the suspension and steering, correct torque values are paramount for the overall structural integrity and safety of the vehicle.

    Always use a calibrated torque wrench when performing any work where torque specifications are provided. Do not rely on "feel" or impact wrenches for final torque, as this can lead to inaccuracies and potential safety hazards.

    Disclaimer: While these specifications are compiled to be accurate, vehicle manufacturers may issue revisions. Always consult your official 2017 Honda Pilot OEM service manual for the most up-to-date and definitive torque specifications. Critical fasteners should always be verified.

    Find a trusted shop on Repairius.

    Need service on your Honda Pilot?

    Request service from shops in your area.

    More specs for the 2017 Honda Pilot

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email