Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Fuse Box Diagram & Amperage

    2019 Jeep Grand Cherokee Fuse Box Diagram

    A complete guide to the fuse and relay locations, diagrams, and amperage ratings for your 2019 Jeep Grand Cherokee.

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2019 Jeep Grand Cherokee? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick answer

    The 2019 Jeep Grand Cherokee has two primary fuse box locations:

    • Power Distribution Center (Under Hood): Located in the engine bay, on the passenger's side near the battery. This box contains high-amperage fuses and relays for major vehicle systems.
    • Interior Fuse Panel (Passenger Kick Panel/Glove Box): Located behind a trim panel in the passenger footwell, to the right of the glove box. This box contains fuses for most interior and body-related components.

    Under-Hood Power Distribution Center

    This main fuse block manages the high-power systems of your Grand Cherokee, including the engine, starter, fuel system, and cooling fans. To access it, open the hood and locate the black rectangular box on the passenger side. Release the clips to remove the cover. The fuse and relay layout is printed on the inside of the lid—always verify your specific vehicle's layout against this guide.

    Fuse & Relay Table (Under Hood)

    Fuse #AmpColorCircuit / Component Protected
    F0325ANaturalAnti-Lock Brakes (ABS) / Electronic Stability Control (ESC) Pump
    F0540AGreenAnti-Lock Brakes (ABS) / Electronic Stability Control (ESC) Valves
    F0630APinkStarter Motor Solenoid
    F0730APinkWindshield Wipers
    F1025ANaturalTrailer Tow (7-Pin Connector)
    F1120ABlueFuel Pump
    F2120ABluePowertrain Control Module (PCM) / Engine Control Module (ECM)
    F2420ABlueHorn
    F3020ABlueIgnition Coils (V6)
    F3425ANaturalA/C Compressor Clutch
    F3820ABlueLeft Low-Beam Headlight (HID)
    F4020ABlueRight Low-Beam Headlight (HID)
    F4115ALight BlueLeft High-Beam Headlight
    F4215ALight BlueRight High-Beam Headlight
    F7740AGreenBlower Motor (HVAC)
    F8830APinkTrailer Brake Control Module

    Common Relays:

    • Starter Relay: Controls power to the starter motor.
    • Fuel Pump Relay: Activates the fuel pump.
    • A/C Clutch Relay: Engages the air conditioning compressor.
    • Blower Motor Relay: Controls the main power for the interior fan.

    Interior Fuse Panel (Passenger Kick Panel)

    This fuse panel is responsible for most of the electronics inside your cabin, including the radio, power outlets, and lighting. To access it, you will need to open the passenger door and remove the trim panel located on the side of the dashboard/kick panel area, to the right of the glove box.

    Fuse & Relay Table (Interior)

    Fuse #AmpColorCircuit / Component Protected
    F1010ARedAirbag / Occupant Restraint Controller (ORC)
    F1310ARedBrake Lights (Center High-Mount Stop Lamp)
    F2220AYellowCigar Lighter / 12V Power Outlet (Instrument Panel)
    F2320AYellowPower Outlet (Center Console)
    F3015ALight BlueRadio / Uconnect Infotainment System
    F3210ARedIgnition Switch / Keyless Go
    F3710ARedInstrument Cluster, Park/Tail Lamps
    F4510ARedSteering Column Control Module
    F4615ALight BlueLeft Brake Light
    F4715ALight BlueRight Brake Light
    F9020AYellowSunroof

    Note: Fuse numbers, amperage, and the circuits they protect can vary based on your vehicle's specific trim level and options (e.g., V6 vs. V8, towing package, premium audio). Always consult the diagram printed on your vehicle's fuse box cover to confirm the exact layout.

    How to Test a Fuse

    Testing a fuse is a simple process. A "blown" fuse is a safety device that has intentionally broken an electrical circuit due to an overcurrent. You can check a fuse in two ways:

    1. Visual Inspection: Pull the suspect fuse from its slot using a fuse puller (often found in the fuse box cover). Hold it up to the light. Inside the colored plastic body, you will see a small metal strip. If this strip is intact, the fuse is good. If the strip is broken or appears burnt, the fuse is blown and must be replaced.
    2. Multimeter Test: For a more definitive test, set a multimeter to the continuity setting (it looks like a sound wave symbol). Touch the probes to the two metal blades on top of the fuse. If the meter beeps or reads close to zero ohms, the fuse is good. If it remains silent or reads "OL" (Open Line), the fuse is blown.

    When replacing a fuse, always use a new fuse with the exact same amperage rating. Using a higher-rated fuse can cause severe damage to the electrical system and create a fire hazard.

    Common Blown Fuses on this Vehicle

    • Blown 12V Power Outlet / Cigar Lighter Fuse (F22/F23): This is one of the most common issues, often caused by a faulty phone charger, a coin falling into the socket, or a defective device. If this fuse blows, first inspect the socket for any foreign objects. Unplug any chargers or accessories before replacing the fuse.

    • Blown Fuel Pump Fuse (F11): If your Grand Cherokee cranks but won't start, the fuel pump fuse is a primary suspect. A blown fuse here could indicate a failing fuel pump that is drawing too much current. If a new fuse blows immediately or soon after, the fuel pump likely needs to be inspected by a professional.

    • Blown Trailer Light Fuse (F10/F88): If you use your Grand Cherokee for towing, these fuses can blow due to faulty trailer wiring. Shorts in the trailer's wiring harness are the most common cause. Before replacing the fuse, inspect the trailer plug and wiring for any corrosion, frayed wires, or damage.

    If a fuse blows repeatedly, it signals an underlying electrical problem that needs to be diagnosed and repaired.


    Need help diagnosing an electrical issue or replacing a component? Find a trusted shop on Repairius.

    Before you pull a fuse on the 2019 Jeep Grand Cherokee

    • Use the label printed on the panel cover or the owner's manual for your exact build. Layouts change with options, model year and build date, so a chart for another truck can be wrong.
    • Replace a blown fuse only with the same amp rating. A larger fuse can let wiring overheat.
    • A fuse that blows again right away means a short or failing component downstream. Find the cause before replacing it again.
    • A good fuse doesn't prove the circuit works — relays, grounds and connectors fail too.
    • Disconnect the battery before working near high-current fuses or cables.

    Learn more: How fuses, relays and truck electrical systems work

    Need service on your Jeep Grand Cherokee?

    Request service from shops in your area.

    More specs for the 2019 Jeep Grand Cherokee

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email