2019 Jeep Grand Cherokee Oil Capacity & Filter Guide

For the 2019 Jeep Grand Cherokee, the oil capacity varies by engine: 6.0 quarts for the 3.6L V6, 7.0 quarts for the 5.7L V8, 7.0 quarts for the 6.4L V8, and 8.0 quarts for the 6.2L Supercharged V8.

Quick Answer

• 3.6L Pentastar V6:

  • Oil Capacity: 6.0 quarts (5.7 liters)
  • Recommended Weight: 5W-20
  • Oil Spec: API SP / SN Plus, meeting Chrysler MS-6395
  • Oil Filter OEM Part #: MOPAR 68191349AC
  • Aftermarket Cross-Reference:
    • Fram PH10060
    • Wix 57526
    • Mobil 1 M1-113A

• 5.7L HEMI V8:

  • Oil Capacity: 7.0 quarts (6.6 liters)
  • Recommended Weight: 5W-20
  • Oil Spec: API SP / SN Plus, meeting Chrysler MS-6395
  • Oil Filter OEM Part #: MOPAR 04892339AB
  • Aftermarket Cross-Reference:
    • Fram CH11665
    • Wix WL10010
    • Mobil 1 M1-116A

• 6.4L HEMI V8 (SRT):

  • Oil Capacity: 7.0 quarts (6.6 liters)
  • Recommended Weight: 0W-40 (SRT recommended)
  • Oil Spec: API SP / SN Plus, meeting Chrysler MS-12633
  • Oil Filter OEM Part #: MOPAR 04892339AB
  • Aftermarket Cross-Reference:
    • Fram CH11665
    • Wix WL10010
    • Mobil 1 M1-116A

• 6.2L Supercharged HEMI V8 (Trackhawk):

  • Oil Capacity: 8.0 quarts (7.6 liters)
  • Recommended Weight: 0W-40 (SRT/Trackhawk recommended)
  • Oil Spec: API SP / SN Plus, meeting Chrysler MS-12633
  • Oil Filter OEM Part #: MOPAR 04892339AB
  • Aftermarket Cross-Reference:
    • Fram CH11665
    • Wix WL10010
    • Mobil 1 M1-116A

Capacity by Engine Option

Oil Change Interval

For the 2019 Jeep Grand Cherokee, the recommended oil change interval varies based on driving conditions:

• Normal Duty: Under normal driving conditions, it is recommended to change the oil and filter every 10,000 miles (16,000 km) or 12 months, whichever comes first. The vehicle's Oil Change Indicator System will also alert you when an oil change is due.
• Severe Duty: If you frequently operate your vehicle under severe duty conditions, such as towing, heavy city traffic, extreme cold or hot weather, or off-road driving, more frequent oil changes are necessary. In these cases, it is advised to change the oil and filter every 4,000 miles (6,500 km) or 6 months, whichever comes first.

Always refer to your owner's manual for the most accurate and up-to-date maintenance schedules tailored to your specific vehicle and driving habits.

Drain Plug Torque

The oil drain plug torque for the 2019 Jeep Grand Cherokee is 20 ft-lbs (27 Nm) for all engine options. It is highly recommended to replace the drain plug crush washer with a new one every time you perform an oil change. This ensures a proper seal and prevents leaks.

How to Change the Oil

Changing the oil on your 2019 Jeep Grand Cherokee is a straightforward process:

1. Warm Up Engine: Drive the vehicle for 5-10 minutes to bring the oil to operating temperature, ensuring it drains more easily.
2. Lift and Secure: Safely lift the front of the vehicle using a jack and secure it with jack stands. Always use appropriate safety measures.
3. Locate Drain Plug: Place an oil drain pan beneath the drain plug on the oil pan.
4. Remove Drain Plug: Using the correct wrench, carefully remove the drain plug and allow all the old oil to drain completely. Be cautious, as the oil will be hot.
5. Replace Crush Washer & Reinstall Plug: Install a new crush washer on the drain plug and reinstall it, tightening to 20 ft-lbs (27 Nm).
6. Locate Oil Filter: Identify the oil filter's location (varies by engine – canister style for V6, cartridge style for V8s).
7. Remove Oil Filter: Use an oil filter wrench to remove the old oil filter. Be prepared for a small amount of oil to drain.
8. Prepare New Filter: Apply a thin film of new oil to the gasket of the new spin-on filter or the O-rings of the new cartridge filter.
9. Install New Filter: Thread on the new spin-on filter by hand until snug, then turn an additional 3/4 to 1 full turn (or follow filter specific instructions). For cartridge filters, ensure new O-rings are installed and housing is tightened appropriately.
10. Refill Oil: Carefully add the recommended amount and type of new oil through the oil fill cap.
11. Check Level & Leaks: Start the engine and let it run for a minute, then shut it off. Wait a few minutes for the oil to settle, then check the dipstick and inspect for any leaks around the drain plug and oil filter.
12. Dispose of Old Oil: Properly dispose of the used oil at a recycling center.

Common Issues / Tips

• 3.6L Pentastar V6 Oil Filter Housing: The 3.6L V6 often uses a plastic oil filter housing that can become brittle over time and may crack during removal or reinstallation, leading to oil leaks. Exercise caution and consider replacing the entire housing if signs of wear or cracking are present. Always use the correct torque when tightening the housing cap. The filter is a cartridge style located on top of the engine.
• HEMI V8 MDS Issues: While not directly oil capacity-related, consistent use of the correct oil weight and specification (especially for the 5.7L and 6.4L HEMI engines with Multi-Displacement System - MDS) is crucial. Incorrect oil can lead to premature wear of the MDS lifters, causing ticking noises and potential engine damage. Ensure you are using oil that meets the Chrysler MS-6395 specification for the 5.7L and MS-12633 for the 6.4L/6.2L.
• Engine Oil Consumption: Some Grand Cherokees, particularly HEMI engines, may exhibit minor oil consumption. It's always a good practice to regularly check your oil level between changes and top off as necessary to prevent low oil conditions.
• Proper Oil Spec is Key: Using oil that meets the specified Chrysler MS (Material Standard) is critical for engine longevity and performance. These specifications go beyond just API ratings and ensure the oil has the correct additive package for your engine.

Need an oil change? Find a trusted shop on Repairius.