Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Brake Pad & Rotor Specs

    2023 Kenworth W900 Brake Pad & Rotor Specs

    Working on this 2023 Kenworth W900? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick reference

    SpecMeasurement
    Front pad PN (OEM)Verify with dealer
    Front pad PN (Aftermarket)Akebono: Verify with dealer <br> Bosch: Verify with dealer <br> Wagner: Verify with dealer <br> Power Stop: Verify with dealer
    Rear pad PN (OEM)Verify with dealer
    Rear pad PN (Aftermarket)Akebono: Verify with dealer <br> Bosch: Verify with dealer <br> Wagner: Verify with dealer <br> Power Stop: Verify with dealer
    Front rotor diameter & new thicknessVerify with dealer
    Front rotor minimum thicknessVerify with dealer
    Rear rotor diameter & new thicknessVerify with dealer
    Rear rotor minimum thicknessVerify with dealer
    Caliper piston count (front/rear)Verify with dealer
    Caliper bracket torqueVerify with dealer
    Caliper slide-pin torqueVerify with dealer
    Brake fluid specDOT 4 or DOT 3 (Verify with dealer for specific recommendation)

    How to choose pads

    For a heavy-duty truck like the Kenworth W900, brake pad selection is critical for safety and performance. Generally, you'll encounter three main types:

    • Semi-Metallic Pads: These are a common choice for heavy trucks due to their excellent stopping power and heat dissipation. They are durable and perform well under heavy loads and repeated braking, making them suitable for the demanding applications a W900 typically faces. They can, however, generate more brake dust and be noisier than ceramic pads.

    • Ceramic Pads: While often favored for passenger vehicles for their quiet operation and low dust, ceramic pads may not always be the primary choice for heavy-duty trucks unless specifically engineered for such applications. If available and specified by the manufacturer for the W900, they can offer good performance with less noise and dust, but their thermal properties and heavy-load performance should be carefully considered.

    • Heavy-Duty (HD) Commercial Vehicle Specific Pads: Many manufacturers produce specialized brake pads designed explicitly for commercial vehicles. These pads are formulated to withstand extreme temperatures, heavy loads, and prolonged braking, offering superior fade resistance and longevity. For a Kenworth W900, seeking out pads explicitly marketed as "heavy-duty commercial" or "truck and bus" will likely yield the best results regarding safety and lifespan.

    Always prioritize pads that meet or exceed OEM specifications for your 2023 Kenworth W900. When in doubt, consult with a Kenworth dealer or a reputable heavy-duty brake specialist.

    Typical service life

    The service life of brake pads and rotors on a Kenworth W900 can vary significantly based on driving conditions, load, driver habits, and the quality of the components. For a heavy-duty truck:

    • Brake Pads: On average, heavy-duty truck brake pads might last anywhere from 30,000 to 100,000 miles or more. Trucks operating in mountainous terrain, stop-and-go city driving, or constantly hauling heavy loads will experience much shorter pad life than those primarily used for long-haul highway driving with lighter loads. Regular inspections (e.g., during oil changes or preventative maintenance) are crucial to monitor wear.

    • Brake Rotors: Rotors generally have a longer lifespan than pads, often lasting through two or more sets of brake pads. However, they are subject to wear, warping, and cracking. Regular inspections for signs of wear, deep grooves, or discoloration are essential. Rotors should be replaced if they fall below the minimum thickness specification or show significant signs of damage.

    It is recommended to inspect your brakes at least every 25,000 to 30,000 miles, or more frequently if your driving conditions are severe. "Pad-slap" refers to merely replacing pads without addressing the rotors; this is generally not recommended for heavy-duty vehicles. Proper rotor resurfacing (if within minimum thickness) or replacement is crucial for optimal braking performance and safety.

    Common brake issues for this generation

    While the Kenworth W900 is a robust vehicle, like all heavy-duty trucks, it can experience common brake issues related to its demanding operational environment:

    • Premature wear: Heavy loads, aggressive driving, and frequent braking can lead to pads and rotors wearing out faster than expected. This is especially true if non-commercial grade components are used.
    • Brake fade: Overheating of the brake system due to prolonged or heavy braking can reduce stopping power. This is a critical safety concern, particularly on long descents. Choosing appropriate heavy-duty pads and maintaining the cooling system are important.
    • Warped rotors: Excessive heat can cause rotors to warp, leading to vibrations, pulsing through the brake pedal, and uneven braking. This often necessitates rotor replacement.
    • Sticking calipers: Caliper pistons or slide pins can seize due to corrosion or lack of lubrication, leading to uneven pad wear, pulling to one side, and reduced braking efficiency.
    • Air system issues: Being an air-braked system, issues with air leaks, compressor faults, or air dryer problems can impact overall braking performance and safety. While not strictly "brake component" issues, they directly affect the system's operation.

    Regular preventative maintenance, including inspection and lubrication of caliper components and meticulous attention to air system integrity, is key to preventing these issues.

    Brake job cost estimate

    The cost of a brake job for a 2023 Kenworth W900 can vary widely depending on the parts chosen (OEM vs. aftermarket, standard vs. heavy-duty), labor rates in your region, and the extent of the work needed (pads only, pads and rotors, or additional caliper/system work). Given the heavy-duty nature of the vehicle:

    • Front Axle (Pads & Rotors): Expect to pay anywhere from $1,500 to $3,500+ per axle. This range accounts for the higher cost of heavy-duty components and the labor involved. If calipers need replacement or rebuilding, the cost will increase.
    • Rear Axle (Pads & Rotors): Similar to the front, the cost for the rear axle can range from $1,500 to $3,500+ per axle. Some W900 configurations may have multiple drive axles, increasing the total cost if all need service.
    • Full Brake Job (all axles): For a complete brake job across all axles (e.g., a standard tractor with two drive axles), the total cost could easily range from $4,500 to $10,000 or more, depending on the specifics of the truck and the severity of wear.

    These estimates typically include parts (pads, rotors, and minor hardware) and labor. It's always advisable to get a detailed quote from a qualified heavy-duty truck service center.

    Find a trusted brake shop on Repairius.

    Need service on your Kenworth W900?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2023 Kenworth W900

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-23.

    Driving or Managing a Fleet?

    Use Dispatchtool for truck navigation, driver communication, dispatching, and fleet management.

    Visit Dispatchtool
    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email