Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Oil Capacity & Filter

    2023 Kenworth W900 Oil Capacity & Filter Guide

    Working on this 2023 Kenworth W900? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Answer

    For the 2023 Kenworth W900, the oil capacity varies significantly based on the engine. Common engine options and their capacities are:

    • PACCAR MX-13: 42 quarts (39.7 liters)
      • Recommended Oil Weight: 10W-30 or 15W-40 (CK-4 rated)
      • Oil Spec: API CK-4
      • Oil Filter OEM Part Number: P550949 (or equivalent)
      • Aftermarket Cross-References:
        • Fram: Consult dealer or Fram catalog
        • Wix: 57701 (for MX-13)
        • Mobil 1: Consult dealer or Mobil 1 catalog
    • Cummins X15: 40 quarts (37.8 liters)
      • Recommended Oil Weight: 10W-30 or 15W-40 (CK-4 rated)
      • Oil Spec: API CK-4
      • Oil Filter OEM Part Number: LF9009 (or equivalent)
      • Aftermarket Cross-References:
        • Fram: Consult dealer or Fram catalog
        • Wix: 57746 (for X15)
        • Mobil 1: Consult dealer or Mobil 1 catalog

    Capacity by Engine Option

    EngineOil Capacity (Quarts)Oil Capacity (Liters)
    PACCAR MX-134239.7
    Cummins X154037.8
    Other EnginesConsult Owner's Manual / Dealer

    Oil Change Interval

    The oil change interval for a 2023 Kenworth W900 is highly dependent on the engine, duty cycle, and oil analysis results. Always refer to your owner's manual for the most accurate and up-to-date information, and consider oil analysis for extended drain intervals.

    • Normal Duty: Typically 30,000 – 50,000 miles or 500-800 operating hours. Some modern engines with premium CK-4 oils and proper oil analysis may allow for longer intervals.
    • Severe Duty: (e.g., frequent idling, short hauls, heavy loads, extreme temperatures) Intervals may need to be shortened to 20,000 – 30,000 miles or 300-500 operating hours. Oil analysis is highly recommended to determine the optimal severe duty interval.

    Drain Plug Torque

    Due to the large size and specific requirements of heavy-duty truck engines, the drain plug torque is critical. Always consult your engine's service manual or a Kenworth dealer for the exact drain plug torque specifications. Over-tightening can damage the oil pan or plug, while under-tightening can lead to leaks.

    • PACCAR MX-13: Consult service manual or dealer. Typically robust, higher torque values than light-duty vehicles.
    • Cummins X15: Consult service manual or dealer. Similar to the MX-13, requiring specific torque.

    Always use a new crush washer or O-ring with each oil change to ensure a proper seal and prevent leaks. These are often included with new oil filters or can be purchased separately.

    How to Change the Oil

    Changing the oil in a heavy-duty truck like the Kenworth W900 is a significant undertaking and should only be performed by individuals with appropriate mechanical knowledge, tools, and safety equipment. It's not a typical DIY job for most owners.

    1. Safety First: Ensure the truck is on a level surface, parking brake is engaged, and wheels are chocked. Allow the engine to cool slightly, but still be warm enough for the oil to flow easily.
    2. Locate Drain Plug: The drain plug is typically found at the bottom of the engine oil pan. Place a large-capacity oil drain pan (40+ quarts) underneath.
    3. Drain Oil: Carefully remove the drain plug and allow all the old oil to drain completely. This can take some time due to the volume.
    4. Replace Drain Plug: Once drained, reinstall the drain plug with a new crush washer/O-ring and torque it to the manufacturer's specifications.
    5. Remove Old Filter(s): Locate the engine oil filter(s). Spin off the old filter(s) using an appropriate filter wrench. Be prepared for some oil spillage.
    6. Install New Filter(s): Apply a thin film of new oil to the gasket of the new filter(s). Hand-tighten the filter(s) until the gasket contacts the mating surface, then turn an additional 3/4 to 1 full turn as specified by the filter manufacturer.
    7. Refill Oil: Remove the oil fill cap and slowly add the recommended type and quantity of new API CK-4 rated oil. Use a funnel to prevent spills.
    8. Check Level: Start the engine and let it run for a few minutes to circulate the new oil and fill the filter(s). Shut off the engine, wait a few minutes for the oil to settle, and then check the oil level using the dipstick. Add more oil if necessary to reach the "FULL" mark.
    9. Inspect for Leaks: Visually inspect the drain plug and oil filter areas for any leaks.
    10. Dispose of Old Oil: Properly dispose of the used oil and filter(s) at an authorized recycling center.

    Common Issues / Tips

    • Proper Oil Specification is Crucial: Always use API CK-4 heavy-duty diesel engine oil. Using incorrect oil can lead to premature engine wear and potential warranty issues.
    • Oil Analysis: For fleet operators or owner-operators looking to optimize maintenance costs and extend drain intervals, regular oil analysis is invaluable. It can identify wear metals, fuel dilution, and coolant contamination, helping to pinpoint potential engine issues early.
    • Multiple Filters: Be aware that some heavy-duty engines may use more than one oil filter (e.g., full-flow and bypass filters). Ensure you replace all specified filters during an oil change.
    • High Capacity: These engines hold a significant amount of oil. Ensure you have adequate storage for the used oil and sufficient new oil on hand.
    • Consult Diagnostics: Modern Kenworth W900s are equipped with sophisticated engine management systems. Pay attention to any dashboard warnings or diagnostic codes related to oil pressure or engine health.
    • OEM vs. Aftermarket Filters: While aftermarket filters from reputable brands are generally acceptable, some operators prefer OEM filters for peace of mind, especially during the warranty period. Always ensure any aftermarket filter meets or exceeds OEM specifications.

    Need service on your Kenworth W900?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2023 Kenworth W900

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-24.

    Driving or Managing a Fleet?

    Use Dispatchtool for truck navigation, driver communication, dispatching, and fleet management.

    Visit Dispatchtool
    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email