Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Transmission & Axle Gear Ratios

    2023 Kenworth W900 — Transmission & Axle Gear Ratios

    Working on this 2023 Kenworth W900? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    The 2023 Kenworth W900 is an iconic Class 8 heavy-duty truck, renowned for its classic long-hood styling, unmatched durability, and exceptional customization. Whether you are building a fleet for over-the-road freight or configuring a heavy-haul beast for oversized loads, understanding the gear ratios in your W900 is critical. The right combination of transmission and rear tandem axle ratios will dictate your truck's gradeability, cruising RPM, and overall fuel efficiency.

    Below is a comprehensive guide to the transmission and axle gear ratios available for the 2023 Kenworth W900.

    Transmission gear ratios

    Kenworth W900 models are typically equipped with Eaton Fuller heavy-duty transmissions, available in both manual and automated manual (AMT) configurations. Below are the internal gear ratios for two of the most common transmissions spec'd in the W900: the Eaton Fuller 18-speed manual and the Eaton Endurant XD 18-speed AMT.

    Eaton Fuller 18-Speed Manual (RTLO-18918B)

    This is the gold standard for heavy-haul owner-operators, offering deep reduction and dual overdrive for maximum flexibility.

    GearRatio
    Low (L, L)14.40
    Low (L, H)12.29
    1st (L)8.56
    1st (H)7.30
    2nd (L)6.05
    2nd (H)5.16
    3rd (L)4.38
    3rd (H)3.74
    4th (L)3.20
    4th (H)2.73
    5th (L)2.28
    5th (H)1.94
    6th (L)1.62
    6th (H)1.38
    7th (L)1.17
    7th (H)1.00
    8th (L)0.86
    8th (H)0.73
    Reverse (L, L)15.06
    Reverse (H, H)3.43

    Eaton Endurant XD 18-Speed Automated Manual

    For modern heavy-haul fleets wanting the ease of an automated transmission without sacrificing extreme low-speed control.

    GearRatio
    1st14.32
    2nd12.18
    3rd8.53
    4th7.26
    5th6.05
    6th5.14
    7th4.38
    8th3.73
    9th3.20
    10th2.73
    11th2.28
    12th1.94
    13th1.61
    14th1.37
    15th1.17
    16th1.00
    17th0.86
    18th0.73
    Reverse (Low)16.92

    Available axle ratios

    The 2023 W900 relies on heavy-duty tandem rear axles, most commonly from Dana Spicer or Meritor. The axles can be customized to extreme degrees based on application, ranging from highway cruising to vocational logging.

    RatioAvailable With (engine/trim/package)RPO/Axle CodeBest For (towing / fuel economy / balanced)
    3.25 / 3.36Cummins X15 / Highway PackagesDana / Meritor Highway TandemsFuel economy (high-speed interstate cruising)
    3.55 / 3.70PACCAR MX-13 or Cummins X15 / Mixed UseStandard Dana/Meritor 40k axlesBalanced (regional haul, standard freight)
    3.90 / 4.10Cummins X15 / Heavy-Haul PackagesMeritor 46k+ Heavy Duty TandemsTowing (heavy-haul, steep grades, logging)
    4.33 / 4.56Cummins X15 / Severe VocationalDana/Meritor Planetary or VocationalExtreme heavy towing (off-highway, low speed)

    Note: Heavy-duty truck axle codes are highly specific to the exact build sheet. Ratios can be specified to the hundredth (e.g., 3.73, 3.91).

    How to identify your axle ratio

    Unlike passenger cars, Class 8 trucks have a few specific ways to identify exactly what powertrain components were installed at the Kenworth factory.

    • Door-Jamb Data Plate: Check the driver’s side door frame. Kenworth installs a comprehensive build plate that lists the GVWR, engine model, transmission model, and the exact front and rear axle models along with their gear ratios.
    • Axle Tag: If the door plate is unreadable or if you suspect the axles have been swapped, crawl under the rear of the truck. Both Dana and Meritor affix a metal identification tag to the differential carrier housing. You may need a wire brush and some brake cleaner to read it, but it will clearly state the model number and ratio (e.g., "Ratio 3.55").
    • VIN Decoder / Dealer Build Sheet: A Kenworth dealership can run your truck's 17-digit VIN. Because these trucks are custom-ordered, the factory build sheet will detail the original transmission and rear-end ratios down to the exact part numbers.

    Towing vs MPG impact

    In the world of Class 8 trucking, the battle between pulling power and fuel efficiency is constant.

    • Numerically lower ratios (e.g., 3.25, 3.36): Known as "tall" or "fast" gears, these allow the engine to run at lower RPMs at highway speeds (e.g., 65-70 mph). This setup is ideal for over-the-road (OTR) trucks pulling standard 80,000 lb loads on mostly flat interstate routes, maximizing fuel economy.
    • Numerically higher ratios (e.g., 4.10, 4.33): Known as "short" or "deep" gears, these multiply torque more effectively. Your engine will run at higher RPMs on the highway (burning more fuel), but you gain exceptional starting power and gradeability. These are mandatory for 100,000+ lb heavy-haul applications, logging, and mountain driving where towing capacity and low-speed control trump MPG.

    Common issues

    While Dana and Meritor heavy-duty tandem axles are built to last well over a million miles with proper maintenance, long-haul and extreme heavy-haul stress can lead to standard wear items:

    • Power Divider (Inter-Axle Differential) Failure: Engaging the power divider lock at high speeds or while one set of tires is already spinning can shear the gears inside the forward rear axle.
    • Ring & Pinion Whine: Incorrect backlash adjustments during a rebuild or severe fluid degradation can lead to a howling noise on acceleration or deceleration, indicating wear on the ring and pinion gear teeth.
    • Carrier Bearing Wear: The driveline carrier bearings support the massive driveshafts. Vibrations during acceleration often point to a failing carrier bearing or U-joint.
    • Wheel Seal Leaks: Though not strictly an internal gear failure, leaking wheel seals can drain the gear oil out of the axle housing. If ignored, this oil starvation will quickly destroy the ring and pinion assembly.

    Find a driveline shop on Repairius.

    Need service on your Kenworth W900?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2023 Kenworth W900

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-10-08.

    Driving or Managing a Fleet?

    Use Dispatchtool for truck navigation, driver communication, dispatching, and fleet management.

    Visit Dispatchtool
    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email