2023 Kenworth W900 Fuse Box Diagram & Amperage
Working on this 2023 Kenworth W900? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick answer
On the 2023 Kenworth W900, you will find the primary fuse box located inside the cab, behind a panel on the driver's side kick panel, near the clutch pedal. Unlike passenger cars, heavy-duty trucks like the W900 consolidate most fuses and relays into this single, more accessible location rather than having separate boxes under the hood or in a trunk.
- Driver's Side Kick Panel Fuse Box: This is the main fuse and relay center for the entire truck. It houses the fuses and relays for engine, lighting, cab, and accessory circuits.
Driver's Side Kick Panel Fuse Box & Relay Center
This is the main fuse panel in your 2023 Kenworth W900. To access it, remove the cover on the driver's side kick panel, low on the dash to the left of the pedals. You will find a diagram on the inside of the cover; always verify the fuse numbers and ratings on your specific truck's legend, as configurations can vary based on optional equipment and powertrain.
Fuses
| Fuse # | Amp | Color | Circuit / Component Protected |
|---|---|---|---|
| F1 | 20A | Yellow | Spare |
| F2 | 10A | Red | ABS ECU (Ignition Power) |
| F3 | 30A | Green | Trailer Power / 12V Auxiliary Power Outlet |
| F4 | 20A | Yellow | Cigar Lighter |
| F5 | 15A | Blue | Radio / Infotainment System, CB Radio Power |
| F6 | 10A | Red | Engine Control Module (ECM) - Ignition Power |
| F7 | 15A | Blue | Gauges, Instrument Cluster |
| F8 | 30A | Green | HVAC Blower Motor |
| F9 | 10A | Red | Marker/Clearance Lights |
| F10 | 15A | Blue | Left High Beam Headlight |
| F11 | 15A | Blue | Right High Beam Headlight |
| F12 | 15A | Blue | Left Low Beam Headlight |
| F13 | 15A | Blue | Right Low Beam Headlight |
| F14 | 15A | Blue | Turn Signals |
| F15 | 20A | Yellow | Fuel Pump |
| F16 | 10A | Red | Airbag / Supplemental Restraint System (SRS) |
| F17 | 30A | Green | Power Windows |
| F18 | 10A | Red | Ignition Switch Power |
| F19 | 20A | Yellow | Trailer Brake Controller |
| F20 | 15A | Blue | Stop Lights / Brake Lights |
| F21 | 10A | Red | Park/Tail Lights |
| F22 | 10A | Red | A/C Clutch |
Relays
The same panel also contains critical relays. These are small black or grey cubes that act as switches for high-current circuits.
| Relay # | Circuit Controlled |
|---|---|
| R1 | Starter Relay |
| R2 | Ignition Main Relay |
| R3 | HVAC Blower Motor Relay |
| R4 | Horn Relay |
| R5 | Headlight Relay (Low Beam) |
| R6 | Headlight Relay (High Beam) |
| R7 | Fuel Pump Relay |
| R8 | A/C Clutch Relay |
How to test a fuse
A blown fuse can cause a circuit to lose power, like a radio that won't turn on or headlights that are out. Testing a fuse is a simple diagnostic step.
- Safety First: Turn off the ignition and all accessories.
- Locate the Fuse: Find the fuse you need to test using the diagram on the fuse box cover.
- Remove the Fuse: Use a fuse puller (often found in the fuse box itself) or a pair of needle-nose pliers to gently pull the fuse straight out of its slot.
- Visual Inspection: Hold the fuse up to the light. Inside the plastic body, you'll see a small metal strip. If this strip is broken or melted, the fuse is blown and needs to be replaced.
- Multimeter Test (for certainty): For a more definitive test, set a multimeter to the continuity setting (it often looks like a sound wave symbol). Touch one probe to each metal blade on the top of the fuse. If the multimeter beeps, the fuse is good. If it remains silent, the fuse is blown.
- Replace the Fuse: If the fuse is blown, replace it with a new one of the exact same amperage rating. Using a higher-rated fuse can cause a fire. The amp rating is printed on top of the fuse and is also color-coded.
Common blown fuses on this vehicle
While any fuse can blow, some are more common than others on heavy-duty trucks like the W900.
-
Cigar Lighter / 12V Outlet Fuse (F4): This is one of the most frequently blown fuses. It's often caused by a faulty phone charger, a loose plug, or a foreign object (like a coin) falling into the socket. Before replacing the fuse, inspect the 12V outlet for any debris.
-
Trailer Power / Trailer Brake Fuses (F3, F19): Problems with trailer wiring are a very common cause for these fuses to blow. A short in the trailer's wiring harness or a faulty component on the trailer (like a light or brake magnet) will often blow the corresponding fuse in the truck. If this fuse blows as soon as you connect a trailer, the problem is almost certainly with the trailer's electrical system.
-
Headlight Fuses (F10-F13): While modern bulbs have a long life, they can sometimes short out when they fail, causing a fuse to blow. If you replace a headlight fuse and it blows again immediately, inspect the headlight wiring harness for any signs of damage, corrosion, or melting. A bad bulb itself is the most common culprit.
If a fuse blows repeatedly, it's a sign of a deeper electrical problem that needs to be diagnosed and repaired. Simply installing a larger fuse is not a solution and creates a serious fire hazard.
Find a trusted shop on Repairius.
Before you pull a fuse on the 2023 Kenworth W900
- Use the label printed on the panel cover or the owner's manual for your exact build. Layouts change with options, model year and build date, so a chart for another truck can be wrong.
- Replace a blown fuse only with the same amp rating. A larger fuse can let wiring overheat.
- A fuse that blows again right away means a short or failing component downstream. Find the cause before replacing it again.
- A good fuse doesn't prove the circuit works — relays, grounds and connectors fail too.
- Many heavy trucks have more than one power distribution point (cab, under-hood or near the batteries), and some circuits use circuit breakers instead of fuses. Some systems have 24-volt starting circuits; confirm the voltage before testing.
- Disconnect the battery before working near high-current fuses or cables.
Learn more: How fuses, relays and truck electrical systems work · Find mobile truck repair
Need service on your Kenworth W900?
Your vehicle and question are already filled in — just add your location.
More specs for the 2023 Kenworth W900
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2023 Kenworth W900 Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.
Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-08-19.