Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Torque Specifications

    2019 Mercedes-Benz Metris Torque Specifications

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2019 Mercedes-Benz Metris? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick reference

    FastenerTorque (ft-lb / Nm)Notes
    Wheel Lug Nuts133 ft-lb / 180 Nm
    Oil Drain Plug22 ft-lb / 30 NmReplace gasket
    Spark Plugs17 ft-lb / 23 Nm
    Front Axle Nut162 ft-lb / 220 NmThen tighten 90 degrees
    Rear Axle Nut258 ft-lb / 350 Nm
    Front Brake Caliper Bracket Bolts81 ft-lb / 110 Nm
    Front Brake Caliper Slide Pins25 ft-lb / 34 Nm
    Rear Brake Caliper Bracket Bolts43 ft-lb / 58 Nm
    Rear Brake Caliper Slide Pins25 ft-lb / 34 Nm
    Valve Cover Bolts7 ft-lb / 9 Nm
    Intake Manifold Bolts7 ft-lb / 9 Nm
    Transmission Pan Bolts6 ft-lb / 8 Nm

    Wheel lug torque pattern

    The 2019 Mercedes-Benz Metris uses a 5-lug wheel pattern. To ensure the wheel is seated evenly, tighten the lug nuts in a star or cross pattern. Never tighten them in a circle. An impact wrench can be used to snug the bolts, but the final torque should always be applied with a torque wrench to the value specified in the table above.

    Brake torque notes

    Properly torquing brake components is critical for safety. The brake caliper bracket bolts are a high-torque, critical fastener. Ensure they are clean and free of debris before assembly. The slide pins should be lubricated with a high-temperature silicone-based brake lubricant to ensure the caliper can move freely. Overtightening the slide pins can cause them to bind.

    Why torque matters

    Using a torque wrench is not just for professionals. Every fastener on your Metris has a specific torque value for a reason. Overtightening can cause the fastener to stretch and fail, or damage the part it is holding. Undertightening can cause parts to come loose, leading to rattles, vibrations, and in the worst-case scenario, a catastrophic failure. A torque wrench is a small investment that pays big dividends in safety and peace of mind.

    Disclaimer: This guide is for informational purposes only. Critical fasteners and procedures should always be verified with the OEM service manual. Torque values can vary based on submodel and specific application.

    Find a trusted shop on Repairius.

    Need service on your Mercedes-Benz Metris?

    Request service from shops in your area.

    More specs for the 2019 Mercedes-Benz Metris

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email