2019 Mercedes-Benz Metris Oil Capacity & Filter Guide

The 2019 Mercedes-Benz Metris takes 7.4 quarts (7.0 liters) of oil when performing a standard oil and filter change on its 2.0L turbocharged engine. As an ASE-certified master technician, I regularly service these versatile cargo and passenger vans, and ensuring you use the correct MB-approved oil specification is absolutely critical to the longevity of the M274 powertrain.

Here is everything you need to know about changing the oil in your 2019 Mercedes-Benz Metris.

Quick Answer: Oil Specs & Filter Part Numbers

• Oil Capacity: 7.4 quarts (7.0 Liters) with filter replacement.
• Recommended Oil Weight: 5W-40 or 0W-40 full synthetic.
• Required Oil Specification: Mercedes-Benz MB 229.5 (API SP / European Formula).
• OEM Oil Filter Part Number: Mercedes-Benz A 270 180 01 09 (Mann HU 711/6 z is the exact OEM equivalent).
• Aftermarket Oil Filter Cross-References: Wix WL10034, Fram CH11473, Mobil 1 M1C-256A.

Capacity by Engine Option

The 2019 Mercedes-Benz Metris in the North American market was only offered with a single engine option, making things straightforward.

Note: Always check the dipstick after a refill to ensure the level is perfectly between the MIN and MAX markings.

Oil Change Interval

Mercedes-Benz utilizes a Flexible Service System (ASSYST) to monitor oil life, but standard guidelines are:

• Normal Duty: Up to 15,000 miles or 12 months (whichever comes first).
• Severe Duty: 10,000 miles or 12 months.

Mechanic’s Note: Because these vans are often used for heavy hauling, frequent stop-and-go delivery routes, or long idling periods, I strongly recommend following the severe duty schedule. Changing the oil every 7,500 to 10,000 miles provides much better protection for the turbocharger and timing components.

Drain Plug Torque

• Drain Plug Torque: 30 Nm (22 ft-lbs).
• Crush Washer: You must replace the copper crush washer on the drain plug every time you change the oil to prevent slow leaks.

How to Change the Oil

The M274 engine uses a top-mounted cartridge-style oil filter, which makes oil changes relatively painless.

1. Warm up the engine: Run the van for a few minutes to get the oil warm (but not scalding hot) so it drains faster and more completely.
2. Remove the filter: Locate the oil filter housing on the top of the engine. Use a 27mm socket to loosen and remove the plastic cap.
3. Replace the cartridge and O-rings: Pull the old paper filter element out. Remove the old rubber O-rings from the plastic cap, lubricate the new O-rings with fresh engine oil, and install them. Snap the new filter cartridge into the cap.
4. Install the filter: Thread the cap back into the housing by hand, then torque to 25 Nm (18 ft-lbs).
5. Drain the oil: Safely lift and support the van. Remove the aerodynamic underbody shield to access the oil pan. Remove the drain plug and let the oil drain completely into a catch pan.
6. Reinstall drain plug: Fit a new crush washer to the drain plug and torque to 30 Nm (22 ft-lbs). Reinstall the underbody shield.
7. Refill the engine: Pour exactly 7.4 quarts of MB 229.5 approved 5W-40 synthetic oil into the filler neck.
8. Verify and reset: Start the engine and let it run for a minute to build oil pressure. Shut it off, wait 5 minutes, and check the dipstick. Finally, reset the maintenance interval via the instrument cluster menu.

Common Issues / Tips for the Metris

• Turbocharger Oil Feed Lines: The M274 engine is highly sensitive to oil quality. Failing to use MB 229.5 certified oil can lead to sludge buildup that clogs the turbocharger oil feed lines, resulting in premature turbo failure.
• Camshaft/Timing Rattle: Keep an ear out for a rattling noise on a cold startup. Infrequent oil changes can accelerate wear on the timing chain tensioner and camshaft phasers—a known issue on some M274 engines. Stick to those severe-duty 10,000-mile intervals.
• Fluid Extractors: Because the oil filter is mounted on top of the engine, many Mercedes technicians prefer to use a pneumatic fluid extractor through the dipstick tube rather than crawling under the van. This is a factory-approved method and saves a lot of time.

Need an oil change? Find a trusted shop on Repairius.