Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Coolant Capacity & Type

    2024 Mercedes-Benz Metris Coolant Capacity & Type

    Comprehensive guide to coolant capacity, type, and maintenance for your 2024 Mercedes-Benz Metris.

    Working on this 2024 Mercedes-Benz Metris? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    The 2024 Mercedes-Benz Metris holds approximately 10 quarts (9.5 liters) of coolant in its total cooling system.

    Quick Answer

    • Total Cooling System Capacity: ~10 quarts (9.5 liters)
    • OEM Coolant Spec: Mercedes-Benz Spec 325.0 or 325.6 (Blue or Pink/Purple, Silicate HOAT)
    • Mix Ratio: 50/50 Pre-mix or 50% concentrate with distilled water

    Capacity by Engine Option

    All 2024 Mercedes-Benz Metris models are equipped with the 2.0L turbocharged inline-4 engine (M274). The cooling system capacity remains consistent across all variants.

    Engine TypeCapacity (Approximate)
    2.0L Turbocharged Inline-410 quarts (9.5 liters)

    Flush Interval

    Mercedes-Benz recommends specific coolant flush intervals to ensure optimal engine performance and longevity. These intervals can vary based on driving conditions:

    • Normal Duty: Replace every 15 years or 150,000 miles, whichever comes first.
    • Severe Duty: If your Metris is frequently subjected to heavy loads, towing, extreme temperatures, or stop-and-go city driving, it's advisable to inspect your coolant more frequently and consider replacing it every 5 years or 75,000 miles.

    Regular inspection of coolant levels and condition (looking for discoloration or debris) is always a good practice.

    How to Refill & Bleed

    Properly refilling and bleeding the cooling system in your Metris is crucial to prevent air pockets, which can lead to overheating. Here's a general procedure:

    1. Safety First: Ensure the engine is completely cool before starting. Wear appropriate personal protective equipment (gloves, eye protection).
    2. Drain the Old Coolant: Locate the radiator drain plug and open it to allow the old coolant to drain into a suitable container. Some models may also have engine block drain plugs.
    3. Flush (Optional but Recommended): If performing a full flush, close the drain plugs, fill the system with distilled water, run the engine with the heater on until it reaches operating temperature, then drain. Repeat until the drained water is clear.
    4. Refill with New Coolant: Close all drain plugs. Slowly pour the new Mercedes-Benz approved coolant (50/50 mix) into the coolant reservoir until it reaches the MAX line.
    5. Bleeding the System:
      • Start the engine with the heater set to maximum heat and fan speed. Leave the reservoir cap off.
      • Allow the engine to run until it reaches operating temperature, and the thermostat opens (you'll feel the upper radiator hose get hot).
      • Continuously monitor the coolant level in the reservoir and top up as needed. Look for air bubbles escaping.
      • Some Mercedes-Benz vehicles may have specific bleed screws on the radiator or coolant hoses; consult your owner's manual for precise locations if applicable. The Metris typically self-bleeds well but requires careful monitoring.
      • Squeeze the upper and lower radiator hoses several times to help dislodge trapped air.
      • Once the air bubbles stop appearing and the coolant level stabilizes, install the reservoir cap.
    6. Post-Procedure Check: Drive the vehicle, then allow it to cool completely. Recheck the coolant level and top up if necessary. Monitor the temperature gauge during subsequent drives.

    Common Cooling System Issues for this Generation (W447 Metris 2016-Present)

    While the Metris is generally reliable, some cooling system issues can infrequently arise:

    • Coolant Leaks: Common areas for leaks can include the radiator, coolant hoses, water pump seals, and the coolant reservoir itself. Due to engine compartment design, small leaks can sometimes be hard to spot initially.
    • Thermostat Issues: A failing thermostat can lead to the engine running too hot (stuck closed) or not reaching optimal operating temperature (stuck open), impacting fuel efficiency and emissions.
    • Water Pump Failure: Although not extremely common, a failing water pump can cause overheating due to inadequate coolant circulation. Symptoms include a whining noise, coolant leaks from the pump, or engine overheating.
    • Auxiliary Water Pump Issues: Some Metris models are equipped with an auxiliary water pump for the turbocharger or heater core circuit. Failure of this pump can lead to specific heating or turbo cooling issues.
    • Coolant Reservoir Cracks: Over time, the plastic coolant reservoir can become brittle and crack, leading to coolant loss. Inspect the reservoir for any hairline cracks.

    Always use the specified Mercedes-Benz coolant to prevent corrosion and compatibility issues with system components.

    Find a trusted shop on Repairius.

    Need service on your Mercedes-Benz Metris?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2024 Mercedes-Benz Metris

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-23.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email