Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Towing Capacity & Payload

    2024 Mercedes-Benz Metris Towing Capacity & Payload

    Working on this 2024 Mercedes-Benz Metris? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Answer

    The 2024 Mercedes-Benz Metris can tow up to 5,000 pounds when properly equipped.

    • Max Towing Capacity: 5,000 lbs
    • Max Payload Capacity: 2,365 lbs (Cargo Van), 1,720 lbs (Passenger Van)
    • Gross Vehicle Weight Rating (GVWR): 6,834 lbs (Cargo Van), 6,834 lbs (Passenger Van)
    • Gross Combined Weight Rating (GCWR): 11,834 lbs
    • Curb Weight: 4,469 lbs (Cargo Van), 5,114 lbs (Passenger Van)
    • Hitch Class: Class III
    • Max Tongue Weight: 500 lbs

    Tow Ratings by Engine & Trim

    The 2024 Mercedes-Benz Metris is powered by a 2.0L turbocharged 4-cylinder engine across all trims, paired with a 9G-TRONIC 9-speed automatic transmission. All Metris models are rear-wheel drive (RWD).

    EngineDrivetrainTrim/PackageMax TowPayload
    2.0L Turbo I4RWDCargo Van5,000 lbs2,365 lbs
    2.0L Turbo I4RWDPassenger Van5,000 lbs1,720 lbs

    Note: These figures are based on manufacturer specifications and assume proper equipment and configuration. Always check your vehicle's specific door-jamb sticker for exact ratings.

    Tow Package Contents

    For the Mercedes-Benz Metris, an available Trailer Hitch Prep Package (Code ET4) may be offered, which provides the necessary wiring and components for a trailer hitch installation. When equipped with a factory-installed trailer hitch, the Metris includes several key features to enhance its towing capabilities:

    • Integrated Trailer Hitch: A Class III trailer hitch receiver, allowing for the maximum towing capacity.
    • 7-Pin Wiring Harness: Provides essential electrical connections for trailer lights (running, brake, turn signals) and, if applicable, trailer brake power (though an integrated trailer brake controller is typically an aftermarket addition for the Metris).
    • Trailer Stability Assist (TSA): This Mercedes-Benz technology is integrated with the Electronic Stability Program (ESP) and works to mitigate trailer sway by applying individual wheel brakes and reducing engine power, helping to keep the trailer tracking straight behind the vehicle.

    A factory-installed transmission cooler is generally integrated into the Metris's cooling system to handle the increased thermal loads associated with towing. However, a dedicated, separate transmission cooler beyond the standard equipment is not typically offered as an individual option.

    While the Metris does not offer an integrated trailer brake controller from the factory, an aftermarket proportional brake controller is highly recommended and often required by law when towing trailers over a certain weight (e.g., 2,000 lbs or 3,000 lbs, depending on local regulations) that have their own braking systems.

    5th-Wheel & Gooseneck

    The 2024 Mercedes-Benz Metris is not designed for 5th-wheel or gooseneck towing. These types of hitches are typically reserved for heavy-duty pickup trucks and commercial chassis that can handle the significantly greater tongue weights and overall loads associated with such trailers. The Metris, being a mid-size van, is limited to conventional bumper-pull towing.

    Weight Distribution & WDH Requirements

    For trailers approaching the maximum 5,000-pound towing capacity of the Mercedes-Benz Metris, especially those with a substantial tongue weight (up to 500 lbs), a Weight Distributing Hitch (WDH) is highly recommended. A WDH helps to distribute the trailer

    Need service on your Mercedes-Benz Metris?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2024 Mercedes-Benz Metris

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-24.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email