Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Oil Capacity & Filter

    2024 Mercedes-Benz Metris: Oil Capacity & Filter Specs

    Working on this 2024 Mercedes-Benz Metris? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    The 2024 Mercedes-Benz Metris takes approximately 7.4 quarts (7.0 liters) of 5W-30 synthetic motor oil that meets Mercedes-Benz specification MB 229.52.

    Quick Answer

    • Oil Capacity: 7.4 quarts (7.0 liters)
    • Recommended Oil Weight: 5W-30
    • Oil Type Specification: Mercedes-Benz MB 229.52 (synthetic)
    • OEM Oil Filter Part Number: Consult dealer for the most accurate part number for your specific build as variations can occur.
    • Aftermarket Oil Filter Cross-References:
      • Fram: Consult Fram's website or catalog for the most accurate cross-reference.
      • Wix: Consult Wix's website or catalog for the most accurate cross-reference.
      • Mobil 1: Consult Mobil 1's website or catalog for the most accurate cross-reference.

    Capacity by Engine Option

    At present, the 2024 Mercedes-Benz Metris is primarily offered with one engine option in the North American market:

    Engine TypeOil Capacity (approx.)Recommended Oil Spec
    2.0L Turbo I47.4 quarts (7.0 liters)MB 229.52 (5W-30)

    Oil Change Interval

    Mercedes-Benz recommends the following oil change intervals for the 2024 Metris:

    • Normal Duty: Every 15,000 miles or 1 year, whichever comes first.
    • Severe Duty: If your driving conditions involve frequent short trips, extensive idling, dusty environments, or heavy towing, it's advisable to shorten the oil change interval. Consult your owner's manual for specific severe duty recommendations, but typically this can be as frequent as every 7,500 miles or 6 months.

    Regular oil changes are crucial for the longevity and performance of your Mercedes-Benz engine.

    Drain Plug Torque

    The oil drain plug on the 2024 Mercedes-Benz Metris should be torqued to 22 ft-lbs (30 Nm). Always use a new crush washer (seal ring) with each oil change to ensure a proper seal and prevent leaks. The crush washer is a single-use item.

    How to Change the Oil

    Changing the oil on your 2024 Mercedes-Benz Metris can be done with basic tools. Here's a general overview:

    1. Warm Up Engine & Lift Vehicle: Drive the vehicle for a few minutes to warm the oil, then safely lift it using a jack and jack stands or a lift.
    2. Locate Drain Plug: Place a suitable drain pan beneath the oil pan and locate the drain plug.
    3. Drain Oil: Carefully remove the drain plug (using the correct wrench) and allow the old oil to drain completely. Be cautious, as the oil will be hot.
    4. Replace Crush Washer: Once the oil has drained, clean the drain plug and install a new crush washer.
    5. Reinstall Drain Plug: Reinstall the drain plug and torque it to the specified 22 ft-lbs (30 Nm).
    6. Replace Oil Filter: Locate the oil filter housing, usually a canister style. Use an oil filter wrench to loosen and remove it. Be prepared for a small amount of oil to drain. Replace the old O-rings with the new ones typically provided with the new filter. Install the new filter and housing, hand-tightening, then tightening an additional amount as specified by the filter manufacturer (usually a quarter to half turn, or to a specific torque if indicated).
    7. Add New Oil: Lower the vehicle. Remove the oil filler cap and carefully add the recommended amount and type of new oil (7.4 quarts of MB 229.52 5W-30).
    8. Check Oil Level: Start the engine and let it run for a few minutes to circulate the oil. Turn off the engine, wait a few minutes, then check the oil level using the dipstick. Add more oil if necessary, ensuring it

    Need service on your Mercedes-Benz Metris?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2024 Mercedes-Benz Metris

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-23.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email