Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Brake Pad & Rotor Specs

    2024 Mercedes-Benz Metris Brake Pad & Rotor Specs

    Complete reference for your Metris's braking system

    Working on this 2024 Mercedes-Benz Metris? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick answer — 2024 Mercedes-Benz Metris

    Caliper Bracket Torque
    180 Nm (133 ft-lbs)
    Caliper Slide-Pin Torque
    30 Nm (22 ft-lbs)

    From the table below. Confirm with your owner's manual for your exact engine.

    Quick Reference

    SpecFrontRear
    Pad PN (OEM)Verify with dealer (typically A0004200702 for prior years, but confirm for 2024)Verify with dealer (typically A0004200320 for prior years, but confirm for 2024)
    Pad PN (Akebono)ASP1785 (for prior years, verify for 2024)ASP1699 (for prior years, verify for 2024)
    Pad PN (BoschQuietCast)BC1785 (for prior years, verify for 2024)BC1699 (for prior years, verify for 2024)
    Pad PN (Wagner OEX/ThermoQuiet)OEX1785/PD1785 (for prior years, verify for 2024)OEX1699/PD1699 (for prior years, verify for 2024)
    Pad PN (Power Stop Z23 Evolution)Z23-1785 (for prior years, verify for 2024)Z23-1699 (for prior years, verify for 2024)
    Rotor Diameter300mm296mm
    Rotor New Thickness28mm12mm
    Rotor Minimum Thickness25mm10mm
    Caliper Piston Count1 (floating caliper)1 (floating caliper)
    Caliper Bracket Torque180 Nm (133 ft-lbs)115 Nm (85 ft-lbs)
    Caliper Slide-Pin Torque30 Nm (22 ft-lbs)30 Nm (22 ft-lbs)
    Brake Fluid SpecDOT 4 PLUS (Low Viscosity)DOT 4 PLUS (Low Viscosity)

    How to Choose Pads

    Choosing the right brake pads for your 2024 Mercedes-Benz Metris is crucial for optimal performance, longevity, and driving comfort. Here's a breakdown of common pad types:

    • Ceramic Pads: These are popular for their low dust production, quiet operation, and long lifespan. They provide consistent braking performance across a wide range of temperatures. Ceramic pads are an excellent choice for most Metris owners, especially those prioritizing cleanliness and quietness. They offer a good balance of performance and comfort for daily driving and light commercial use.

    • Semi-Metallic Pads: Often chosen for their excellent stopping power and heat dissipation, semi-metallic pads are a robust option. They are generally more aggressive than ceramic pads and can handle higher temperatures and heavier loads, making them suitable for Metris vans that frequently carry heavy cargo or operate in demanding conditions. The trade-off can be increased brake dust and potentially more noise compared to ceramic pads.

    • Heavy Duty (HD) Pads: For Metris owners who regularly tow or carry maximum payloads, heavy-duty pads are the way to go. These pads are designed to withstand extreme heat and prolonged braking, offering superior fade resistance and longevity under severe use. While they might generate more dust and noise than other types, their primary advantage lies in their ability to maintain consistent braking in the most strenuous situations. Always ensure any heavy-duty pad you choose is compatible with your Metris's braking system.

    Typical Service Life

    The service life of your 2024 Mercedes-Benz Metris brake pads and rotors can vary significantly based on driving habits, road conditions, and the type of pads installed. On average, you can expect the following:

    • Front Brake Pads: 25,000 to 45,000 miles. Due to the Metris's weight and the front brakes handling the majority of stopping force, front pads tend to wear faster.
    • Rear Brake Pads: 40,000 to 60,000 miles. Rear pads generally experience less stress than front pads.
    • Rotors: Rotors typically last through two sets of brake pads, meaning roughly 50,000 to 90,000 miles. However, this is highly dependent on how well they are maintained and if they are machined (resurfaced) when pads are replaced, provided they remain above the minimum thickness specification.

    Mercedes-Benz recommends regular brake inspections (typically every 10,000 miles or annually) to monitor wear and ensure timely replacement.

    Common Brake Issues for This Generation

    The Mercedes-Benz Metris, being a robust commercial and passenger van, generally has a reliable braking system. However, like any vehicle, some common issues can arise:

    • Premature Pad Wear: While less common with proper maintenance, aggressive driving or consistently heavy loads can accelerate pad wear, especially on the front axle. Choosing the correct pad type for your driving style and usage is key.
    • Brake Noise (Squealing/Grinding): Squealing is often caused by worn pads, lack of lubrication on caliper slide pins, or the absence of anti-squeal shims. Grinding usually indicates severely worn pads, where the metal backing plate is contacting the rotor, or debris lodged in the caliper. Addressing noise promptly is important to prevent further damage.
    • Vibration/Pulsation: A pulsating brake pedal or steering wheel vibration during braking is typically a sign of warped or unevenly worn rotors. This can be caused by overheating, improper break-in procedures, or uneven lug nut torque. In many cases, rotors can be resurfaced if they are above the minimum thickness, or they will need replacement.
    • Sticky Calipers: Over time, caliper slide pins can corrode or seize due to lack of lubrication, leading to uneven pad wear, pulling to one side during braking, and reduced braking efficiency. Regular inspection and lubrication during brake service can prevent this.

    Brake Job Cost Estimate

    The cost of a brake job for your 2024 Mercedes-Benz Metris can vary depending on your location, the shop you choose, and the quality of parts (OEM vs. aftermarket). These estimates include parts and labor:

    • Front Brake Pad Replacement: $250 - $500
    • Rear Brake Pad Replacement: $200 - $400
    • Front Brake Pad and Rotor Replacement: $500 - $900
    • Rear Brake Pad and Rotor Replacement: $400 - $800
    • Full Brake Job (all four wheels, pads and rotors): $900 - $1,700+

    These are general estimates. Always get detailed quotes from reputable shops. Using quality replacement parts is highly recommended for optimal performance and safety.

    Find a trusted brake shop on Repairius.

    Need service on your Mercedes-Benz Metris?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2024 Mercedes-Benz Metris

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-23.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email