Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Factory Maintenance Schedule

    2019 Nissan Altima Factory Maintenance Schedule

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2019 Nissan Altima? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick reference

    MileageServiceNotes
    5,000 milesEngine oil and filter change, Tire rotationOr every 6 months, whichever comes first.
    10,000 milesEngine oil and filter change, Tire rotationOr every 12 months, whichever comes first. Inspect all fluid levels, brake pads/rotors, steering and suspension components, exhaust system, drive shaft boots.
    15,000 milesEngine oil and filter change, Tire rotationOr every 18 months, whichever comes first. Replace in-cabin microfilter. Inspect drive belts.
    20,000 milesEngine oil and filter change, Tire rotationOr every 24 months, whichever comes first. Inspect all fluid levels, brake pads/rotors, steering and suspension components, exhaust system, drive shaft boots.
    30,000 milesEngine oil and filter change, Tire rotation, Replace engine air filter, Replace in-cabin microfilter, Inspect drive belts, Replace brake fluidOr every 36 months, whichever comes first. Inspect fuel lines and connections.
    40,000 milesEngine oil and filter change, Tire rotationOr every 48 months, whichever comes first. Inspect all fluid levels, brake pads/rotors, steering and suspension components, exhaust system, drive shaft boots.
    60,000 milesEngine oil and filter change, Tire rotation, Replace engine air filter, Replace in-cabin microfilter, Inspect drive belts, Inspect fuel lines and connectionsOr every 72 months, whichever comes first. Inspect CV joints/boots. Nissan recommends inspecting the Continuously Variable Transmission (CVT) fluid and replacing it if primarily driven under severe conditions. Nissan does not specify a fuel filter replacement interval, typically lifetime in the tank.
    75,000 milesEngine oil and filter change, Tire rotation, Replace in-cabin microfilterOr every 90 months, whichever comes first. Inspect drive belts.
    90,000 milesEngine oil and filter change, Tire rotation, Replace engine air filter, Replace in-cabin microfilter, Inspect drive belts, Replace brake fluidOr every 108 months, whichever comes first. Inspect fuel lines and connections.
    105,000 milesEngine oil and filter change, Tire rotation, Replace spark plugs, Replace in-cabin microfilter, Inspect drive beltsOr every 126 months, whichever comes first. This is a major service.
    120,000 milesEngine oil and filter change, Tire rotation, Replace engine air filter, Replace in-cabin microfilter, Inspect drive beltsOr every 144 months, whichever comes first. Inspect fuel lines and connections.
    150,000 milesEngine oil and filter change, Tire rotation, Replace engine air filter, Replace in-cabin microfilter, Inspect drive belts, Replace brake fluid, Replace engine coolantOr every 180 months, whichever comes first. Inspect fuel lines and connections. Consult owner's manual for CVT fluid replacement if not done previously, especially under severe conditions.

    Maintaining your 2019 Nissan Altima according to the factory schedule is crucial for its longevity, performance, and resale value. This guide outlines the recommended services from 5,000 to 150,000 miles.

    Engine Oil and Filter

    Nissan recommends changing your engine oil and filter every 5,000 miles or 6 months, whichever comes first, under normal driving conditions. For severe driving conditions (see severe-duty schedule below), this interval may be shortened. Consistent oil changes are vital for the health of your engine, as fresh oil lubricates moving parts and dissipates heat effectively.

    Tire Rotation

    To ensure even wear and extend the life of your tires, rotations are recommended every 5,000 miles or 6 months, coinciding with your oil changes. This helps prevent premature wear and maintains optimal handling.

    Air Filters (Engine and Cabin)

    Your 2019 Altima has two main air filters: the engine air filter and the in-cabin microfilter. The engine air filter should be replaced every 30,000 miles or 36 months, protecting your engine from contaminants. The in-cabin microfilter, which filters the air you breathe, should be replaced more frequently, every 15,000 miles or 18 months, or more often if you drive in dusty environments or suffer from allergies.

    Fuel Filter

    For the 2019 Nissan Altima, the fuel filter is typically a

    Need service on your Nissan Altima?

    Request service from shops in your area.

    More specs for the 2019 Nissan Altima

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email