Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Tire Size & Pressure

    2019 Nissan Altima Tire Size, Pressure & Wheel Specs

    A master technician's guide to the 2019 Nissan Altima's tire sizes, PSI, bolt pattern, and lug torque.

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2019 Nissan Altima? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    As an ASE-certified master technician, I regularly service mid-size sedans like the Nissan Altima. Completely redesigned for the 2019 model year, the sixth-generation Altima introduced available All-Wheel Drive (AWD) and a variable compression turbo engine. These drivetrain updates mean that proper tire selection, inflation, and maintenance are more critical than ever for optimal handling, fuel economy, and safety.

    Below is your comprehensive guide to the 2019 Nissan Altima’s tire, wheel, and pressure specifications.

    Quick answer: 2019 Nissan Altima Tire & Wheel Specs

    Here are the essential factory specifications you need when dealing with the wheels and tires on a 2019 Altima:

    • OEM tire sizes: 215/60R16, 215/55R17, or 235/40R19 (depending on trim level)
    • Recommended cold tire pressure: 32 to 34 PSI front and rear (always verify with the driver's side door jamb placard)
    • Bolt pattern: 5x114.3 mm (5x4.5 inches)
    • Wheel sizes: 16x7J, 17x7.5J, or 19x8J (Offset typically ranges from +40mm to +45mm)
    • Load index/Speed rating: 95H (16"), 94V (17"), or 96V (19")
    • Spare tire size: T135/90D16 or T135/70D16 (compact temporary spare)
    • TPMS sensor frequency: 433 MHz

    Tire sizes by trim

    Nissan offered several wheel and tire packages across the diverse 2019 Altima lineup. Upgraded trims boast larger, lower-profile tires for sharper steering response and an aggressive look.

    Trim LevelOEM Tire SizeWheel SizeTypical Placard Pressure
    S215/60R1616x7J32 PSI
    SV215/55R1717x7.5J32 PSI
    SL215/55R1717x7.5J32 PSI
    SR (2.5L)235/40R1919x8J33 - 34 PSI
    SR (VC-Turbo)235/40R1919x8J34 PSI
    Platinum / Edition ONE235/40R1919x8J34 PSI

    Recommended replacement tires

    Whether you are prioritizing longevity, all-season grip, or a budget-friendly price, here are my top picks for the 2019 Nissan Altima:

    • Premium Tier: Michelin Defender T+H – Exceptional tread life and a remarkably quiet ride. Perfect for high-mileage commuters.
    • Mid-Range Tier: Continental TrueContact Tour – Offers fantastic wet braking, solid fuel efficiency, and impressive year-round traction.
    • Mid-Range Sport Tier: Pirelli Cinturato P7 All Season Plus – A great pairing for the SR and Platinum 19-inch wheels, blending touring comfort with athletic grip.
    • Budget Tier: General AltiMAX RT43 or RT45 – A dependable, long-lasting tire that won't break the bank while still delivering reliable all-season performance.

    When to inflate to max load psi

    Note: Heavy Duty (HD) truck inflation rules do not apply to mid-size passenger cars.

    Because the 2019 Altima is a mid-size passenger sedan and not an HD pickup truck, you should never inflate your tires to the "Max PSI" listed on the tire's sidewall. That maximum number indicates the absolute highest pressure the tire structure can hold, not the operating pressure for your vehicle.

    Always stick strictly to the 32–34 PSI recommended on the yellow and white placard located on the driver's side B-pillar (door jamb). Overinflating past this placard recommendation will cause a harsh ride, premature center tread wear, and a reduced contact patch that compromises braking and handling.

    Lug nut torque & pattern

    Proper wheel installation is a critical safety factor. Do not use an impact wrench to run the lug nuts completely tight.

    • Bolt Pattern: 5x114.3 mm
    • Lug Nut Torque Spec: 83 ft-lbs (113 Nm)
    • Thread Size: M12 x 1.25
    • Tightening Pattern: Always tighten the 5 lug nuts in a crisscross (star) pattern to ensure the wheel seats flush against the rotor hub. Use a calibrated torque wrench for the final tightening.

    Common tire issues for this vehicle

    In the shop, I see a few recurring tire-related trends with the 2019 Altima:

    1. Pothole Damage on 19-inch Wheels: The SR, Platinum, and Edition ONE trims use 235/40R19 tires. The narrow "40" series sidewall provides less cushion against sharp impacts. These tires (and rims) are highly susceptible to sidewall bubbling and rim bending from deep potholes. Check your pressures frequently to ensure you have maximum pneumatic cushioning.
    2. AWD Tread Depth Sensitivity: 2019 was the first year the Altima offered Intelligent All-Wheel Drive. On AWD models, you must rotate your tires strictly every 5,000 miles. If tires wear unevenly, the difference in circumference can bind and damage the AWD system. You generally cannot replace just one tire on an AWD Altima; they must be replaced in sets of four or shaved to match the existing tread depth.
    3. TPMS Sensor Battery Life: Operating on 433 MHz, the OEM tire pressure sensors typically last 5 to 7 years. Because this is a 2019 vehicle, expect some sensors to begin failing due to dead batteries over the next couple of years.

    Need new tires? Find a trusted shop on Repairius.

    Need service on your Nissan Altima?

    Request service from shops in your area.

    More specs for the 2019 Nissan Altima

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email