2014 Ram 2500 Paint Color Codes & Touch-Up Guide

Whether you are dealing with a rogue shopping cart scratch or gravel chips from hauling heavy loads, fixing the paint on your 2014 Ram 2500 starts with finding the exact factory color match. Ram trucks (manufactured by Fiat Chrysler Automobiles) use specific three-digit alphanumeric paint codes.

Below is your complete guide to 2014 Ram 2500 paint codes, where to locate your truck’s specific code, and how to successfully apply touch-up paint.

Quick reference

Here are the most common factory colors offered for the 2014 Ram 2500. Always verify your specific paint code before ordering touch-up supplies, as names can vary slightly by dealership and trim package.

Color Name	Paint Code	Type
Bright White	PW7	Solid
Black Clearcoat	PX8	Solid
Flame Red	PR4	Solid
Maximum Steel Metallic	PAR	Metallic
True Blue Pearl	PBU	Pearl
Granite Crystal Metallic	PAU	Metallic
Billet Silver Metallic	PSC	Metallic
Deep Cherry Red Crystal Pearl	PRP	Pearl
Black Gold Pearl	PUG	Pearl
Prairie Pearl	PTA	Pearl
Western Brown	PKW	Pearl
Blue Streak Pearl	PCL	Pearl
Copperhead Pearl	PLB	Pearl

Note: If you are uncertain of your exact color, use your VIN at a local Ram dealer or an automotive paint supplier to confirm the correct code.

Where to find your paint code

For the 2014 Ram 2500, locating your paint code is typically a straightforward process. Chrysler/Ram places the vehicle identification and paint code information on the manufacturer's compliance sticker.

1. Driver’s Side Door Jamb: Open the driver’s side door and look at the latch pillar (the B-pillar) or the door edge itself.
2. Find the Sticker: Look for a black and white (or sometimes yellow/white) sticker containing your VIN, tire pressure info, and vehicle weights.
3. Locate the Code: Towards the bottom of this sticker, look for the letters PNT: followed by a three-digit code (e.g., PNT: PW7). This three-digit alphanumeric sequence is your exact factory paint code.

If the sticker is missing or unreadable, you can call any local Ram dealership parts department, provide them with your 17-digit Vehicle Identification Number (VIN), and they can look up your factory paint code in their system.

Best touch-up paint sources

Getting a high-quality paint match is critical to a seamless repair. Here are the most reliable sources for 2014 Ram 2500 touch-up paint:

• Dealership (Mopar): Your local Ram/Chrysler dealership parts counter sells OEM Mopar touch-up paint pens and small brush bottles. This is the safest bet for an exact factory match.
• AutomotiveTouchup: A highly recommended online supplier that custom-mixes paint based on your exact factory code. They offer paint pens, brush-in-bottle, and aerosol spray cans for larger repairs.
• Dupli-Color: Available at most local auto parts stores (like AutoZone, O'Reilly, and Advance Auto). They offer the "Perfect Match" line. It is highly convenient, though their selection of specific Ram pearl coats might be limited in-store.
• Tcoat: Another great online provider of custom-mixed auto paint, offering comprehensive kits that include primer, base coat, and clear coat along with blending solutions.

How to use touch-up paint

For a durable and invisible repair, follow these essential steps:

1. Clean the Area: Thoroughly wash the chipped or scratched area with soap and water. Follow up with a wax and grease remover or rubbing alcohol to ensure no contaminants are left in the chip.
2. Apply Primer (if needed): If the scratch goes all the way down to bare metal or plastic, apply a tiny drop of automotive primer. Let it dry completely (usually 20–30 minutes).
3. Apply the Base Coat: Shake your touch-up paint vigorously. Apply the color in very light, thin layers using a micro-dabber or a toothpick (the brushes included in bottles are often too large and lay down too much paint). Allow 15-20 minutes of dry time between coats.
4. Apply Clear Coat: Once the color layer is fully dry and sits just below the level of the surrounding original paint, apply a layer of clear coat to seal it, protect it from UV rays, and match the factory gloss.

Color matching tips for pearls and tri-coats

Colors like Deep Cherry Red Crystal Pearl (PRP) and Black Gold Pearl (PUG) can be notoriously tricky to match due to the metallic flakes and pearl pigments suspended in the paint.

• Agitate the Paint: Metallic and pearl flakes settle at the bottom of the bottle quickly. Shake the paint pen or bottle vigorously for at least two minutes before application, and continue to shake it frequently during the process.
• Test Before Applying: Always test the paint on a piece of cardboard or a metal test card before applying it to your truck. Check the color match in natural sunlight.
• Keep Layers Thin: Heavy blobs of metallic paint will cause the metallic flakes to lay incorrectly, making the repair look darker or lighter than the surrounding area. Multiple thin layers are the secret to matching the metallic orientation.

If your paint damage is larger than a standard rock chip, or if your Ram features a complex tri-coat paint job that you don't feel comfortable tackling, it is best to leave it to the professionals. Find a trusted body shop on Repairius.