2019 Subaru Crosstrek: Wiper Blade Sizes

Quick Reference

Best Aftermarket Replacements

Choosing the right wiper blade for your 2019 Subaru Crosstrek ensures clear visibility in all weather conditions. Aftermarket blades often outperform and outlast original equipment. Here are some of the best options available, ranging from premium to standard:

• Bosch ICON (Premium): A top-tier beam-style blade known for its durability and all-weather performance. The asymmetrical spoiler provides even pressure on the windshield for a clean wipe every time.
• Rain-X Latitude Water Repellency (Premium): This popular beam blade not only clears water effectively but also applies a Rain-X water-repelling coating to your windshield with every wipe, causing water to bead up and roll off.
• PIAA Si-Tech (Premium): These silicone blades are extremely long-lasting and leave a light silicone film on the windshield, which promotes water beading. They are an excellent choice for drivers in wet climates.
• Trico Force (Mid-Range): A rugged and durable beam blade designed to perform at high speeds and in harsh weather. It features a swept-wing spoiler that cuts through wind and rain.
• Michelin Stealth Ultra (Mid-Range): This hybrid blade combines the flexibility of a beam blade with the sturdy structure of a conventional one, offering excellent performance and a sleek look.

Attachment Style

The 2019 Subaru Crosstrek uses a J-hook attachment for both the driver and passenger side front wipers. This is the most common type of wiper arm, making replacement straightforward. The rear wiper, however, uses a more specific Roc Loc 2 style arm. While many aftermarket rear wipers come with the necessary adapter, it's crucial to confirm compatibility when purchasing.

How to Install

Replacing the front wiper blades on your Crosstrek is a simple task that requires no tools.

1. Lift the Wiper Arm: Gently pull the wiper arm away from the windshield until it locks in the upright position.
2. Release the Old Blade: Locate the small tab on the underside of the J-hook where the blade is attached. Press this tab and push the old wiper blade down to unhook it from the arm.
3. Install the New Blade: Slide the new wiper blade's adapter into the J-hook on the wiper arm until you hear a distinct "click." This confirms the blade is securely locked in place.
4. Lower the Arm: Carefully lower the wiper arm back onto the windshield.

The rear wiper follows a similar process, but the release mechanism on the Roc Loc 2 connector may be slightly different. Always consult the instructions included with your new blade.

When to Replace

Wiper blades are a wear item and should be replaced every 6 to 12 months for optimal safety and performance. You should replace them sooner if you notice any of the following signs:

• Streaking: The blade leaves streaks or bands of water on the windshield.
• Chattering: The blade skips or vibrates as it moves across the glass.
• Squeaking: The wipers make an audible noise with each pass.
• Cracked Rubber: The rubber squeegee is visibly cracked, split, or hardened from sun exposure.

Need wipers swapped fast? Find a shop on Repairius.