2016 Toyota Camry Fluid Type Specs
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2016 Toyota Camry? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick Reference
| Fluid | Type/Spec | Capacity |
|---|---|---|
| Engine Oil | SAE 0W-20, ILSAC GF-5 / API SN | 4.6 quarts (2.5L 2AR-FE) / 6.4 quarts (3.5L 2GR-FE) |
| Engine Coolant | Toyota Super Long Life Coolant (SLLC) | 6.5 quarts (2.5L) / 7.7 quarts (3.5L) |
| Automatic Transmission Fluid | Toyota Genuine ATF WS | 6.9 quarts (service refill) |
| Brake Fluid | DOT 3 | As needed |
| Power Steering Fluid | N/A (Electric Power Steering) | N/A |
| Windshield Washer Fluid | Toyota Genuine Washer Fluid or equivalent | 4.8 quarts |
Engine Oil
Type/Spec: SAE 0W-20, ILSAC GF-5 / API SN Capacity: 4.6 quarts (2.5L 4-cylinder 2AR-FE) / 6.4 quarts (3.5L V6 2GR-FE) with filter change.
For the 2016 Toyota Camry, the required engine oil is SAE 0W-20. This is a low-viscosity oil that helps improve fuel economy and cold-weather starting. The oil must also meet ILSAC GF-5 or API SN specifications. These are quality standards that ensure the oil meets certain performance and protection requirements.
While synthetic oil is not strictly required by the manufacturer, it is highly recommended. Synthetic oils offer superior performance and protection compared to conventional oils, especially in extreme temperatures. They also last longer, allowing for extended oil change intervals.
Intervals: Toyota recommends changing the engine oil and filter every 10,000 miles or 12 months, whichever comes first, under normal driving conditions. However, if you frequently drive in dusty or dirty conditions, tow a trailer, or make a lot of short trips, you should change the oil more often, such as every 5,000 miles or 6 months.
Common Pitfalls: Do not use a different viscosity oil, such as 5W-20 or 5W-30, unless you cannot find 0W-20. Using a thicker oil can decrease fuel economy and may cause the engine to run less efficiently. Always use an oil that meets the ILSAC GF-5 or API SN specification.
Engine Coolant
Type/Spec: Toyota Super Long Life Coolant (SLLC) Capacity: 6.5 quarts (2.5L) / 7.7 quarts (3.5L)
Toyota SLLC is a pre-mixed, pink-colored coolant that is specifically designed for use in Toyota vehicles. It is a hybrid organic acid technology (HOAT) coolant that provides long-lasting protection against corrosion and rust.
Intervals: The factory-fill coolant is designed to last for 10 years or 100,000 miles. After the initial service, the coolant should be replaced every 5 years or 50,000 miles.
Common Pitfalls: Never mix different types of coolant. Mixing SLLC with other coolants can cause a chemical reaction that can lead to engine damage. If you need to add coolant, make sure to use Toyota SLLC. Do not use "universal" coolants, as they may not be compatible with the materials in your Camry's cooling system.
Automatic Transmission Fluid
Type/Spec: Toyota Genuine ATF WS Capacity: 6.9 quarts (service refill)
The 2016 Toyota Camry is equipped with a sealed transmission that does not have a dipstick. The transmission is filled with Toyota Genuine ATF WS (World Standard) fluid, which is a low-viscosity fluid that is designed for long life.
Intervals: Toyota considers the transmission fluid to be a "lifetime" fluid and does not recommend regular changes under normal driving conditions. However, if you frequently tow a trailer or drive in heavy traffic, it is a good idea to have the fluid inspected and, if necessary, changed every 60,000 miles.
Common Pitfalls: Do not use any other type of ATF. Using a different ATF can cause shifting problems and may damage the transmission. If you need to have the transmission serviced, take it to a qualified technician who has experience with Toyota vehicles.
Brake Fluid
Type/Spec: DOT 3 Capacity: As needed
The 2016 Toyota Camry uses DOT 3 brake fluid. DOT 3 is a glycol-based brake fluid that is compatible with most modern braking systems.
Intervals: Brake fluid should be inspected every 5,000 miles or 6 months and replaced as needed. The fluid can become contaminated with moisture over time, which can lower its boiling point and reduce braking performance. It is a good idea to have the brake fluid flushed and replaced every 2-3 years, regardless of mileage.
Common Pitfalls: Never use a lower-grade brake fluid, such as DOT 2. Also, do not use silicone-based DOT 5 brake fluid, as it is not compatible with the materials in your Camry's braking system. You can, however, use a higher-grade DOT 4 or DOT 5.1 fluid, as they are compatible with DOT 3.
Power Steering Fluid
The 2016 Toyota Camry is equipped with electric power steering (EPS) and does not use power steering fluid.
Windshield Washer Fluid
Type/Spec: Toyota Genuine Washer Fluid or equivalent Capacity: 4.8 quarts
You can use any type of windshield washer fluid in your Camry. However, it is a good idea to use a fluid that is specifically designed for use in all seasons.
Find a trusted shop on Repairius.
More specs for the 2016 Toyota Camry
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2016 Toyota Camry Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.